Glenn S.
100% improvement in dust collection. Super easy to install. Worth every penny.
Tom K.
Easy to install, game changer
Samuel H.
The new add on chute works great!
Tim H.
Replacement for one I exploded with small chunks of wood!
Inventables R.
Love the product only have one issue the 2” OD connector broke on me not for sure how
Ian L.
Easy install following the video instructions. Did some initial testing and the dust collection is vastly improved.
Michael P.
Everything went great. Love the upgrade to my saw. Made a big difference.
Anthony O.
Fitment was flawless and the dust collection works much better than the original!
Randall B.
Easy installation. Works great.
Eric K.
I bought my Bosch GCM12SD last Fall, got it home, and couldn't believe the amount of sawdust it blasted all over my shop. It has the absolute worst dust collection I've ever seen in a miter saw. My shop vacuum had been connected to my old miter saw, but hose fittings can't attach to the Bosch exhaust tube... another poor design.
The situation was so bad that I didn't use the saw again. Months went by until I saw an ad for your kit. I thought it was worth a try.
Once it was installed, I made a test cut... there was virtually no sawdust!! You can actually see the sawdust getting sucked into the new dust chute.
Your system has met, if not exceeded, my expectations!
David B.
A great addition to my Bosch miter saw. Collects dust efficiently and was super easy to install. Solid directions and everything fit perfect. Definite improvement in dust collection over the setup that came installed from the manufacturer and I'm looking forward a whole lot less dust in my future! Thanks!
Brandon G.
worked thank you
Glen D.
Everything worked well. Installation was straightforward after watching the installation video. Zip tying the hose to cord is a bit flimsy. I designed and 3D printed a support bracket that support the hose.
James
The fit and appearance is as good as you could hope for, the functionality so far has been encouraging having made just a few cuts using a small vacuum that I usually use with orbital sanders and other smaller tools. The performance was noticeably better, the collection of fine particles was an important improvement, no coating of sawdust on the backside of the saw. Eventually it will have a better collection system connected, appreciated as an important part of keeping my work area a safer environment
Gilbert R.
The included video instructions made the installation go smoothley. The hardest part of the installation was to find suitable connectors to marry the Chute to my dedicated vacuum. Dust collection on my Bosch miter saw has signifacanty improved.
Dale B.
Only had it a week. but it is awesome.
I just saw that the chute had a piece broken off, oh well, a well placed piece of duct tape and all is well with the world, only wish I had bought the saw and chute sooner.
M. Shane P.
Worked exactly as advertised. Installation was easy.
Gary S.
Fit perfectly easy install works great.
Jerry H.
You say about 70% reduction in dust but I get almost 97%. A truly outstanding product. Been using miter saws for 30 years. First time that I don't make a mess to clean up. Thanks....Jerry
.charles b.
It's great. It was so easy to install, it Works! Better than Id hoped it would a awesome product Id 100% recommend getting one!
Gabor E.
It was a joy to install so easily..
I had the older version so swapping out to the newer chute model was a piece of cake, as there is no need to change out the adapter.. It appears to be working well after a week of use and I have no complaints.. Highly recommended as an upgrade..
Craig H.
2nd purchase & absolutely love it!!!
Marc C.
Love it, best investment ever…..except for my house, and my stock purchase of Apple, and my wife. Not in that order.
Nino l.
i still have not had the chance to install it yet ,,i am just setting up my new shop and i am almost the point to tune up my saw and install your piece. I will ley you know how it goes when im done. Thanks so much for the contact
Leigh M.
Installation was a breeze while watching the video. I was surprised by the difference in dust collection from stock. Wish I would have done this sooner.
Phil L.
I had the original and loved it. This new one is even better.
Shaun S.
Great product, makes a noticeable difference
Benjamin M.
Like the new version
Andre L.
Perfect fit, extremely efficient, collect 90% of sawdust.
very easy to install. One of the best upgrade in my shop.
Thank you shop nation
Gary B.
Installation was easy. Haven't cut with it yet as I am still building my station. If it works as well as on my DeWalt, I'll be very happy.
Juan Paulo I.
Fit is great and easy installation
Scott M.
Step one needed the original dust chute to be removed. Bosch used some severe thread lock and I could not remove.
Thomas F.
First rate engineered design. Sturdy construction. Perfect fit.
Edilberto C.
The process was very easy, from order to install. Works as stated. Nice job!
Randy W.
Nice upgrade to my new Bosch 10 inch miter saw.
It was easy to install and the video instructions were clear.
I am able to hook it up to my Jet dust collector with a 4 inch hose and has plenty of air movement. I need to improve the connection to my dust collector.
James C.
Excellent dust collection
Michael H.
It's a bit harder to install than I thought it would be. But the QR code to watch an installation video was great!
Nicholas B.
Overall purchase, shipping, instructional video and installation process was a snap, thanks!
Tom E.
The shoot is well made and fits flawlessly. I added a conduit clamp to the hose as the zip ties weren't very stable. I also replaced the rubber extension with a piece 1" longer that helps collect more of the dust that shoots out from under the throat plate.
Greg H.
I ordered the additional connectors along with the dust shute. Unfortunately the connectors did not fit my 1.25 inch tubing coming from my dust extraction vac. I was able to cut one of the connectors and make it work. I would also like to see a longer rubber adapter, think it would capture more of the dust. Overall it does a pretty good job.
Jeremy G.
Awesome communication, support and instructions provided with an effective, quality product
David H.
Works vary well. Really helps keep shop clean. I recommended to friend and he has purchased one.
Anthony J.
Fits like it should, collects dust better than factory
Dennis W.
Fits perfectly. noticeable difference. Thanks!
Stéphane P.
Easy to install and work very well
Werner K.
Easy to install. It gets some of the dust but still a lot of it gets away. May be my dust collection system. I will try my shop vac, I have noticed that my dust collection system works better on devices that have the 4” collection ports
Gregory H.
Fast shipping, and no issues installing the new dust collection setup on my new Bosch miter saw!
William W.
Thanks for sending me the replacement part. as you can see by the attached pictures i needed to use good old duct tape to ensure a good connection. i needed to screw on the flexible hose directly to the thread port on the molded collection attachment. i needed maximum clearance of the saw arm.
Dan C.
Great product! Installed it on my Bosch Miter saw and it greatly reduced the dust from the OEM part.
John G.
Doesn’t fit the Bosch 10” sliding miter saw
Very disappointed
brian S.
Every thing fix and working well so far. Thanks
james s.
Install was easier than I thought. Print quality was great.
Mark J.
This really is a great upgrade over the stock dust collector. Hooked to a good vacuum, it collects over 90 % of the dust from the mitre saw. Highly recommend it
Matthew P.
Solves the dust problem. Not a huge fan of where the recommended place is to zip tie the hose
Paul M.
It improves dust collection for thinner stock (3/4-1") but if you cut thicker stock the rubber gasket compresses and it is not as effective. All around a bit of an improvement over the standard Bosch collection
Gary J.
Looks like a winner!
Jack R.
I ordered the Bosch dust collection unit for my brand new miter saw!
Opened the box and noticed the assembly card was for a Dewalt system, and then confirmed the hardware was for a Dewalt system!
Packing slip in the box is for Bosch system!
So definitely a quality control issue! Now I am awaiting on my correct replacement product! Once I receive the correct product, I can provide a better evaluation!
Christopher S.
Shipping was a little slow, had to wait impatiently. (USPS)
Easy to install, video instructions were clear.
Works amazingly, catches 97-98% of sawdust.
Jerry D.
Perfect Fit, Good Instructions, Significantly improved collection.!
Brad L.
Perfect fit! I look forward to connecting the dust chute to a festool dust collector in the near future. By modding my Bosch, I saved cash, compared to purchasing kapex.
Steve G.
Love it, and does exactly what you want, eat wood dust! Also just received my zero clearance insert with dust collection for added help, Sweet Set Up.
Steve
Anthony B.
Works awesome, and seems really high quality. My shop vac tends to pull the hose down, which I fear will pull the cord over time; so I'll have to think of a better solution for hooking up my shop vac.
Daniel J.
What an improvement! I have a 6 inch run to the device, however only get to use 1.5. Tricky to use a wider flex pipe, but could be done. ;-)
Daniel C.
Would like the hose to be a little longer than what shipped with it just so it would be easier to hook up my dust extractor
Stephen C.
Easy to install thanks to the detailed installation video. I have just used it to cut down some MDF and my goodness what a difference.
Michael C.
It does what it says. A lot less external saw dust around the saw. And it was fairly easy to install. The best way to have word of mouth about your product, is to have a product do what is claimed and this does!
Denis L.
These work great when you pay attention and clear out all the little off cuts otherwise they can shoot into it and explode it. That's why I got the 2nd one, I just wish they came with a spare set of shorts since I seemed to have soiled the ones I was wearing when I made the first mistake!
Karri R.
Love your products, and customer service is outstanding!
Cory C.
Definitely made a big difference. I highly recommend this product!
Matt M.
The dust chute really cleaned up the workspace. The install video was a perfect complement!
Dave W.
Installation was easy and it works great!
Naturaldesign L.
Drastically reduces clearance for miter cuts on edge (IE can't cut a 1x6 on edge with this attached. I tried cutting it down, but still not going to work for me.
Mark B.
Dust collector arrived well packaged and in good time. Installation went smoothly and performance is much better than factory. Highly Recommended!
gene b.
It won't fit my saw . My saw is 12" axel guide cordless. I don't know if the cordless model is different then the straight electric model. Anyway the dust chute i got won't fit!
Jerry W.
Works so much better than the OEM version.
As you can see the photo not 100% capture but much better than Bosch’s attempt. This surprised me because unlike the Dewalt version- which I had on a previous saw which looked completely different than the manufacturer’s collecter, theShopNation unit looked very similar to the Bosch version.
Adam A.
GREAT PRODUCT! SUPER FAST SHIPPING!
Bernardo G.
I say it improved it by 70% in that regard it’s ok but I did have to use a longer rubber skirt the space that was left with your did not cover to the deck of the saw so there was no difference but with the longer skirt I’m at 70% better then before
Michael B.
This product should have come with the saw. So much better than the factory dust collection. Well worth the extra $$.
Shawn E.
Works well. Only complaint I have was the process of removing one screw and replacing it by the power cord in one go the elbows. It’s really difficult to get to and cut the wire a little bit which isn’t ideal.
John A.
Big improvement in handling dust
Peter H.
Easy to install and clear instructions to follow.
Jack H.
Hey Shop Nation, Your dust chute is a brilliantly designed and engineered product. The pic shows literally all of the loose sawdust on my miter saw station after 22 cuts of 1 x 4 cedar. These were the first cuts after installing the chute (which BTW couldn't have been any easier) and I could not be happier. Well done. Keep up the great work and the great videos. Thanks! (Oh yeah, the price was right, too!) I would give this 10 stars. It is easily twice as good as you said it would be.
Trevor S.
Second go at the review.
Installation went very smoothly. Even easier than the video.
I made just two Curt’s after installation. The difference was immediately obvious. So little dust got through.
I have it hooked up to the main dust collection for the workshop and it works fine. Looking at getting a dust vacuum to have a dedicated unit, but that’s got to wait till the 3D printer has been purchased. Thanks Shop Nation for that :(.
Justin
This is my second one, this thing works great!
Eric S.
It definitely cuts down on the amout of dust that doesn't make it into the vacuum. It was pretty easy to install as well with a well narrated video install instructions. Definitely reccomend
THOMAS P.
You made a quick mention in your installation video that some Bosch saws use thread locker and it might be a bit difficult to get those screws out. You were right about that. Fortunately, and unexpectedly, a good pair of small vice-grips on the heads worked well. Only a tiny rotation is needed to break them loose.
Re: the unit, it works well and I'm very pleased with it. However, the supplied 2.25 adapter doesn't mate to my Oneida Air hose end, which is, strangely, 2 5/16 OD. Maybe there will be a worldwide standard someday!
Charles E.
While the dust collection efficiency is noticeably better, the reliance on zip ties for the flex hose and vacuum connection feels like a major design flaw. It’s a functional improvement hampered by a makeshift mounting system.
Scott A.
As expected as described
Thanks!!
Bret B.
Perfect fit and works great.the only thing i dont like id the sip tie to hold the hose in place .im going to order one for my dewalt in a couple weeks
Charles M.
As I said before, I am very please with the results of my Bosch dust chute from Shop Nation.
The item I just bought was the same Gen II that I purchased in 2024. When I replace the unit I found that the original chute did have a few cracks on two of the bolt flanges on the saw attachments. I did not know the problem until I replaced the chute.
Again I say, the dust chute does a great job of collecting dust.
Gregg C.
Well thought out design. Assembled in minutes. Tamed one of the worst offenders in my shop.
