Peter T.
Easy to install on my saw and reduces dust considerably. I combine it with a hood around the saw and get basically zero dust.
JD W.
Works awesome!! I have used your products in the past. Great quality! A++
Colin G.
Easy install great YouTube instructions well made does an admirable job
David R.
Nice fit and finish; early take is it is quite effective at capturing majority of dust. Great instruction video. Appears that it may interfere with thicker lumber, as it hangs down lower than stock, although in fairness I haven't thoroughly tested that yet. I would note that it will be very easy to remove, so I will remove only the sides of my dust collection "backstop", to allow for easy use of tilt and swing functions, but will leave the balance of the backstop so I can use the saw without the Shop Nation collector when necessary, and still capture much of the dust.
Valerie S.
Purchased this for my husband's workshop and he LOVES
it. He said the installation process was excellent. Fit is flawless (his words). It claims to pick up 80% more dust and it actually does. He said he would highly recommend it. Shipping was fast. Great price. We will definitely be purchasing from your company in the future. Thanks
John K.
I had an older chute for my old Makita and I replaced that with the Bosch. I tryed a tent like contraction , expensive and I was dissatisfied but so far this has worked pretty well so I guess time will tell. But at this point it seems to work well
Scott P.
Haven't really used it much, but it is definitely a big improvement over OEM dust collection. Install video was clear and extremely helpful
LYLE H.
Setup was easy and it improved dust collection by 85-90%. It is a huge improvement!
Robert W.
It’s way better than the stock DC.
JAMES RICHARD T.
Easy to install, and the amount of dust collected is unreal.
Alexandro B.
It works excellent it improved my dust collection
Carolyn R.
Greatly improves dust collection for the compound miter saw. Love this after-market imrpovement.
MIKE J.
It works to perfection‼️ Assembly was easy—just as shown on videos. Surpassed all expectations. Hope to find more products from SHOP NATION in the future
Andy
Added the upgraded dust collection to my bosch miter saw with a bit of skepticism. I was wrong. Huge upgrade and I now have fantastic dust collection on the saw. Well worth it! Thank you!
Eric M.
This is an excellent addition to my miter saw! The improvement over the original is evident with every cut! It is a must have for reducing dust!
Joe R.
After trying 5 other solutions, I decided to give this a try. It doesn’t happen as often as it should, but this product is better than advertised. Very happy.
Frank K.
Easy install. Tip: you’ll need to work around the power cord on the right side when removing the existing parts. Be mindful not to damage the cord. My Philips screwdriver is relatively new and the sides started to cuts into the sheathing. Easy to overlook if you don’t notice it.
Much better dust collection compared to stock.
Jeremy H.
I ordered the Bosch dust chute for the 12" sliding miter saw and it works great! You can tell a difference if you do not have powerful suction hooked up to it. Overall it was a good purchase and definitely cuts down on the amount of sawdust from the saw.
Dana O.
Delivery and packaging was good. Instructions were great, and the parts are high quality!
Michael L.
Absolutely amazing! Works wonderful money. Well spent, thank you. Shop Nation
Dan N.
Love it! It works great!
scott t.
Website was not clear when I purchased by dust collection system and I bought the wrong one. It took five days to have someone look at the problem and tell me to re-order the 10 in system. Shipping takes way to long with no options to rush orders. I cannot comment on the product yet as the first one did not fit. I will have to wait until I install the 10 in system to see if it improves dust collection. So far this has been frustrating.
Tom S.
Easy to install, seems to be effective, time will tell.
Jason J.
From the time of looking at, buying, shipping and installation was a painless decision and a great product to add to my saw. I would easily say that my dust collection has increased by 80-90%. I would highly recommend this product to anyone.
Steve K.
I broke off the threaded portion of the dust collection chute body trying to remove the hard tube I installed instead of the flexible tube. I Super Glued it back together and later threaded on the flexible tube. It's holding together so far. Doesn't work well on 4 X 4's but dust collection on 4/4 and 6/4 material is greatly improved.
John M.
Overall, the dust collection on my saw is much better than before. Installation was straightforward, following the video instructions. The parts seem well made, so it should last. My only gripes are that the supplied zip-ties were inadequate to secure the hose in the position I wanted, and the outlet should have come with an elbow. It also didn't fit my hose, but nothing ever does, so I don't fault SN for that. I managed to make my own attachment with stronger zip-ties, and 3D printed an elbow that fits my hose better. I love this setup!
Bruce C.
Seems to work well
Wayne G.
Fit perfect. Much better than the factory piece. Thank you!!
will h.
This dust chute is a must have upgrade for your BOSCH miter saw! Great design and very easy install.
Anh N.
I installed it on my Bosch 10-Inch Dual-Bevel Glide Miter Saw. The dust collection intake works very well, but I’m not a fan of the output port mounting method, which relies on a couple of zip ties. The video shows it being zip-tied to a section of the power cable, causing the output port to move along with the glide action of the saw. I’m not sure why the design didn’t make use of the existing mounting holes. I also dislike that I can no longer use the original dust bag because of the excessive movement of the output port.
James P.
Impressed with how much dust this thing picks up
Ray C.
What a difference a year makes! You can hear the vacuum at the intake near the blade. Great inprovement over the OEM nonsense.
David D.
The attachment for the hose (ties) is very floppy and is not well thought out. The rubber flairs out too much at the bottom and I need to separate the guide by too
Much to have it slide through.
Scott M.
Quick and easy install, works great
Rebecca l.
fits perfect, I would recommend it to someone else, definitely worth it
Greg M.
Great product. Easy to install and very effective!
John R.
Worked as expected.
Richard D.
Great product! Fits perfectly
Charles A.
Second purchase for this product. Good quality fast shipping.
Gregory D.
it is a perfect fit and well designed. installation video was very precise and helpful. overall, a great product at a great price. I tried to get the OEM part to replace the original broken one but was unable to get it in Australia. I am glad I came across this and was shipped from the USA quicker than I received notification that I could not get on here. Look forward to seeing what else I can get in the future.
Chris D.
Already broke! Used my saw for the 1st time, a few cuts into it and it threw a wood chunk into it and broke. Still mostly works but dam...
Steven K.
Perfect fit! Tremendously increases the dust collection!!! 100% recommend!!
Marion A.
Received order promptly, QR code to video instructions was very straightforward, and the performance is well beyond my expectations. Great product with top notch fulfillment!
Andre P.
Installing it removed approximately 1.5 inches of cutting capacity, not worth it.
Herb G.
This is the second one that I have had on my Bosch saw. My only complaint is that the rubber attachment gets flimsy and comes undone. Other than that, I love it.
James S.
Installation looks good, but haven't used it enough to get a good opinion of how well it works, but so far so good!
Bob B.
Product works as a replacement part, but it does not radically improve dust collection.
Joe F.
Better than OEM!!!!
Jay C.
Works like a charm. Clean up is minimal, no more piles of sawdust on table and dust floating everywhere. Saw and vac are run through a Ortis vacuum switch.
Andrew M.
Your dust collector adapters don't fit my vacuum adapters. However my vacuum does fit the bosch saw dust collector. You would think you would have the same connection as the original bosch saw. Vacuum DeWalt DWV010 l was told there's nothing you can do for me.I have to figure it out on my own.
Thomas M.
Works great! Also got the screw sizing guide (orange) and it's beautifully manufactured.
Frank F.
Nice product that vastly improved dust collection for my saw.
Jeff S.
This thing has improved our dust collection so much! What a great product!
Dominic F.
Fit perfectly and was super easy to install.
Allen F.
Install went smoothly. Works really well.
John H.
Greatly improves dust collection. Hooked up to small shop vac and very pleased with the results.
David Lemley L.
Works great!!!
MYLES K.
Dust collector was very easy to install and it works well but it really depends on how powerful your vacuum system is to make it work properly. I still have an issue with debris falling in the kerf slot.
All in all it is the best solution for my miter saw and I am grateful for Shop Nation creating it and making it available to everyone.
Brian D.
Does the best job I’ve seen collecting dust for a miter saw.
Jeffrey C.
Instructions easy to understand and follow. Once I removed the screws holding the old chute (difficult to remove) the new chute went on easily. Already in use
Michael K.
Works perfect !!!!!
Eric T.
This product is great. Easy to install and work great!
Augusto B.
Really does make a huge difference.
Gary G.
It did go in easily. A little bit noisy, but that means it's effectively sucking dust. It does a fine job and I can get rid of of my sawdust tent I used to have around it.
Marks W.
It’s easy to install and as a good job of collecting the dust. The amount of cutting room that you lose is a disappointment. Found that I had to trim radius corners the rubber shield that came with it to reduce some of the catching on material.
Kevin M.
The instructions were easy to follow, and (if Bosch hadn't run the power cable on my saw wrong) the installation was quick. Most important, IT WORKS! I immediately saw a dramatic reduction in dust- or maybe I didn't see nearly as much dust. Almost all of it made it to my vacuum. The product is sturdy, well-designed, and does what it claims.
Anthony O.
The parts I ordered for my saw fit perfectly. The video that came with the parts made the installation of the parts very easy!!! I highly recommend the Nation Store for parts and service.
Kenneth S.
Easy installation, much better dust collection than factory and at a fair price.
Peggy H.
Was easy to install
Paul D.
Love it! Collects 90-95% of the sawdust. Highly recommend!
L S.
The only issue is when cutting 4x4’s the rubber collector catches on the wood and does not catch any sawdust till it clears.
Victor M.
The new dust chute definitely captures a lot more dust and setup was a breeze. It's never going to be perfect but this solution is huge improvement.
Matt L.
Works as advertised, easy to install... Great product.!
James L.
It works well but I cut same blade same wood and I do not think it is that much better than stock. I do cutting boards long grain and end grain, 3D and chevron.
Kevin W.
Easy to order. Delivered relatively qquickly considering the distance it travelled and worked exactly as promised, (once I'd removed the kink fro the shop vac hose... oops) My only gripe was the price as I'm in the UK and it cost quite a bit more to get it here thanks to both the US and UK governments taking their bite of the pie. It has transformed the dust collection of my mitre saw so many thanks.
Mark L.
Significant improvement in dust collection. Took it slow and step by step and followed the video. No issues and it works great.
Greg G.
Extremely easy to install. The only thing I may change is the connection of the flex hose. Tie wrapping it to the power cord seems a bit janky, but it works….
David J.
Honestly still in disbelief at how effective it is, cut around 300 lf of pine 2x4 to build some rafters for a porch roof. At the end of the day I would estimate 98% of the dust was caught by my dust collector. There was also a noticeable lack of fine dust floating around the cut station. On the first use I saved 30 minutes of brushing and vacuuming all those little nooks and crannies that would collect debris.
Only minor complaint was installation on my Bosch Axial. You should recommend removal of the blade guard and blade. The power feed runs in front of one of the screws and it takes a little finesse to thread without pinching the cable housing and damaging it. Pulling the blade off fives your hand room to work the cable and get a snug fit. It's also safer to not have your hands anywhere near a blade!
Brent B.
I liked it so much on my first miter saw I bought one for the upgrade too. This one installed really easy and is easy to take off so you can change blades. The saw can handle a bigger hose, I might model around some on that and make it bigger so the bottleneck in pressure is closer to the blade.
Shane P.
I would like to have been supplied a bracket that could have used the cord holding screw to secure the hose top connection to - rather than zip-tie around the power cord.
Matt L.
Fits perfectly and looks great…
Jeff G.
Installation was super easy by following along with the linked installation video instructions. Most importantly, the performance is great. The dust collection is significantly better than the stock configuration.
Glenn S.
100% improvement in dust collection. Super easy to install. Worth every penny.
Tom K.
Easy to install, game changer
Samuel H.
The new add on chute works great!
Tim H.
Replacement for one I exploded with small chunks of wood!
Inventables R.
Love the product only have one issue the 2” OD connector broke on me not for sure how
Ian L.
Easy install following the video instructions. Did some initial testing and the dust collection is vastly improved.
Michael P.
Everything went great. Love the upgrade to my saw. Made a big difference.
