Thomas M.
Works great! Also got the screw sizing guide (orange) and it's beautifully manufactured.
Frank F.
Nice product that vastly improved dust collection for my saw.
Jeff S.
This thing has improved our dust collection so much! What a great product!
Dominic F.
Fit perfectly and was super easy to install.
Allen F.
Install went smoothly. Works really well.
John H.
Greatly improves dust collection. Hooked up to small shop vac and very pleased with the results.
David Lemley L.
Works great!!!
MYLES K.
Dust collector was very easy to install and it works well but it really depends on how powerful your vacuum system is to make it work properly. I still have an issue with debris falling in the kerf slot.
All in all it is the best solution for my miter saw and I am grateful for Shop Nation creating it and making it available to everyone.
Brian D.
Does the best job I’ve seen collecting dust for a miter saw.
Jeffrey C.
Instructions easy to understand and follow. Once I removed the screws holding the old chute (difficult to remove) the new chute went on easily. Already in use
Michael K.
Works perfect !!!!!
Eric T.
This product is great. Easy to install and work great!
Augusto B.
Really does make a huge difference.
Gary G.
It did go in easily. A little bit noisy, but that means it's effectively sucking dust. It does a fine job and I can get rid of of my sawdust tent I used to have around it.
Marks W.
It’s easy to install and as a good job of collecting the dust. The amount of cutting room that you lose is a disappointment. Found that I had to trim radius corners the rubber shield that came with it to reduce some of the catching on material.
Kevin M.
The instructions were easy to follow, and (if Bosch hadn't run the power cable on my saw wrong) the installation was quick. Most important, IT WORKS! I immediately saw a dramatic reduction in dust- or maybe I didn't see nearly as much dust. Almost all of it made it to my vacuum. The product is sturdy, well-designed, and does what it claims.
Anthony O.
The parts I ordered for my saw fit perfectly. The video that came with the parts made the installation of the parts very easy!!! I highly recommend the Nation Store for parts and service.
Kenneth S.
Easy installation, much better dust collection than factory and at a fair price.
Peggy H.
Was easy to install
Paul D.
Love it! Collects 90-95% of the sawdust. Highly recommend!
L S.
The only issue is when cutting 4x4’s the rubber collector catches on the wood and does not catch any sawdust till it clears.
Victor M.
The new dust chute definitely captures a lot more dust and setup was a breeze. It's never going to be perfect but this solution is huge improvement.
Matt L.
Works as advertised, easy to install... Great product.!
James L.
It works well but I cut same blade same wood and I do not think it is that much better than stock. I do cutting boards long grain and end grain, 3D and chevron.
Kevin W.
Easy to order. Delivered relatively qquickly considering the distance it travelled and worked exactly as promised, (once I'd removed the kink fro the shop vac hose... oops) My only gripe was the price as I'm in the UK and it cost quite a bit more to get it here thanks to both the US and UK governments taking their bite of the pie. It has transformed the dust collection of my mitre saw so many thanks.
Mark L.
Significant improvement in dust collection. Took it slow and step by step and followed the video. No issues and it works great.
Greg G.
Extremely easy to install. The only thing I may change is the connection of the flex hose. Tie wrapping it to the power cord seems a bit janky, but it works….
David J.
Honestly still in disbelief at how effective it is, cut around 300 lf of pine 2x4 to build some rafters for a porch roof. At the end of the day I would estimate 98% of the dust was caught by my dust collector. There was also a noticeable lack of fine dust floating around the cut station. On the first use I saved 30 minutes of brushing and vacuuming all those little nooks and crannies that would collect debris.
Only minor complaint was installation on my Bosch Axial. You should recommend removal of the blade guard and blade. The power feed runs in front of one of the screws and it takes a little finesse to thread without pinching the cable housing and damaging it. Pulling the blade off fives your hand room to work the cable and get a snug fit. It's also safer to not have your hands anywhere near a blade!
Brent B.
I liked it so much on my first miter saw I bought one for the upgrade too. This one installed really easy and is easy to take off so you can change blades. The saw can handle a bigger hose, I might model around some on that and make it bigger so the bottleneck in pressure is closer to the blade.
Shane P.
I would like to have been supplied a bracket that could have used the cord holding screw to secure the hose top connection to - rather than zip-tie around the power cord.
Matt L.
Fits perfectly and looks great…
Jeff G.
Installation was super easy by following along with the linked installation video instructions. Most importantly, the performance is great. The dust collection is significantly better than the stock configuration.
Glenn S.
100% improvement in dust collection. Super easy to install. Worth every penny.
Tom K.
Easy to install, game changer
Samuel H.
The new add on chute works great!
Tim H.
Replacement for one I exploded with small chunks of wood!
Inventables R.
Love the product only have one issue the 2” OD connector broke on me not for sure how
Ian L.
Easy install following the video instructions. Did some initial testing and the dust collection is vastly improved.
Michael P.
Everything went great. Love the upgrade to my saw. Made a big difference.
Anthony O.
Fitment was flawless and the dust collection works much better than the original!
Randall B.
Easy installation. Works great.
Eric K.
I bought my Bosch GCM12SD last Fall, got it home, and couldn't believe the amount of sawdust it blasted all over my shop. It has the absolute worst dust collection I've ever seen in a miter saw. My shop vacuum had been connected to my old miter saw, but hose fittings can't attach to the Bosch exhaust tube... another poor design.
The situation was so bad that I didn't use the saw again. Months went by until I saw an ad for your kit. I thought it was worth a try.
Once it was installed, I made a test cut... there was virtually no sawdust!! You can actually see the sawdust getting sucked into the new dust chute.
Your system has met, if not exceeded, my expectations!
David B.
A great addition to my Bosch miter saw. Collects dust efficiently and was super easy to install. Solid directions and everything fit perfect. Definite improvement in dust collection over the setup that came installed from the manufacturer and I'm looking forward a whole lot less dust in my future! Thanks!
Brandon G.
worked thank you
Glen D.
Everything worked well. Installation was straightforward after watching the installation video. Zip tying the hose to cord is a bit flimsy. I designed and 3D printed a support bracket that support the hose.
James
The fit and appearance is as good as you could hope for, the functionality so far has been encouraging having made just a few cuts using a small vacuum that I usually use with orbital sanders and other smaller tools. The performance was noticeably better, the collection of fine particles was an important improvement, no coating of sawdust on the backside of the saw. Eventually it will have a better collection system connected, appreciated as an important part of keeping my work area a safer environment
Gilbert R.
The included video instructions made the installation go smoothley. The hardest part of the installation was to find suitable connectors to marry the Chute to my dedicated vacuum. Dust collection on my Bosch miter saw has signifacanty improved.
Dale B.
Only had it a week. but it is awesome.
I just saw that the chute had a piece broken off, oh well, a well placed piece of duct tape and all is well with the world, only wish I had bought the saw and chute sooner.
M. Shane P.
Worked exactly as advertised. Installation was easy.
Gary S.
Fit perfectly easy install works great.
Jerry H.
You say about 70% reduction in dust but I get almost 97%. A truly outstanding product. Been using miter saws for 30 years. First time that I don't make a mess to clean up. Thanks....Jerry
.charles b.
It's great. It was so easy to install, it Works! Better than Id hoped it would a awesome product Id 100% recommend getting one!
Gabor E.
It was a joy to install so easily..
I had the older version so swapping out to the newer chute model was a piece of cake, as there is no need to change out the adapter.. It appears to be working well after a week of use and I have no complaints.. Highly recommended as an upgrade..
Craig H.
2nd purchase & absolutely love it!!!
Marc C.
Love it, best investment ever…..except for my house, and my stock purchase of Apple, and my wife. Not in that order.
Nino l.
i still have not had the chance to install it yet ,,i am just setting up my new shop and i am almost the point to tune up my saw and install your piece. I will ley you know how it goes when im done. Thanks so much for the contact
Leigh M.
Installation was a breeze while watching the video. I was surprised by the difference in dust collection from stock. Wish I would have done this sooner.
Phil L.
I had the original and loved it. This new one is even better.
Shaun S.
Great product, makes a noticeable difference
Benjamin M.
Like the new version
Andre L.
Perfect fit, extremely efficient, collect 90% of sawdust.
very easy to install. One of the best upgrade in my shop.
Thank you shop nation
Gary B.
Installation was easy. Haven't cut with it yet as I am still building my station. If it works as well as on my DeWalt, I'll be very happy.
Juan Paulo I.
Fit is great and easy installation
Scott M.
Step one needed the original dust chute to be removed. Bosch used some severe thread lock and I could not remove.
Thomas F.
First rate engineered design. Sturdy construction. Perfect fit.
Edilberto C.
The process was very easy, from order to install. Works as stated. Nice job!
Randy W.
Nice upgrade to my new Bosch 10 inch miter saw.
It was easy to install and the video instructions were clear.
I am able to hook it up to my Jet dust collector with a 4 inch hose and has plenty of air movement. I need to improve the connection to my dust collector.
James C.
Excellent dust collection
Michael H.
It's a bit harder to install than I thought it would be. But the QR code to watch an installation video was great!
Nicholas B.
Overall purchase, shipping, instructional video and installation process was a snap, thanks!
Tom E.
The shoot is well made and fits flawlessly. I added a conduit clamp to the hose as the zip ties weren't very stable. I also replaced the rubber extension with a piece 1" longer that helps collect more of the dust that shoots out from under the throat plate.
Greg H.
I ordered the additional connectors along with the dust shute. Unfortunately the connectors did not fit my 1.25 inch tubing coming from my dust extraction vac. I was able to cut one of the connectors and make it work. I would also like to see a longer rubber adapter, think it would capture more of the dust. Overall it does a pretty good job.
Jeremy G.
Awesome communication, support and instructions provided with an effective, quality product
David H.
Works vary well. Really helps keep shop clean. I recommended to friend and he has purchased one.
Anthony J.
Fits like it should, collects dust better than factory
Dennis W.
Fits perfectly. noticeable difference. Thanks!
Stéphane P.
Easy to install and work very well
Werner K.
Easy to install. It gets some of the dust but still a lot of it gets away. May be my dust collection system. I will try my shop vac, I have noticed that my dust collection system works better on devices that have the 4” collection ports
Gregory H.
Fast shipping, and no issues installing the new dust collection setup on my new Bosch miter saw!
William W.
Thanks for sending me the replacement part. as you can see by the attached pictures i needed to use good old duct tape to ensure a good connection. i needed to screw on the flexible hose directly to the thread port on the molded collection attachment. i needed maximum clearance of the saw arm.
Dan C.
Great product! Installed it on my Bosch Miter saw and it greatly reduced the dust from the OEM part.
John G.
Doesn’t fit the Bosch 10” sliding miter saw
Very disappointed
brian S.
Every thing fix and working well so far. Thanks
james s.
Install was easier than I thought. Print quality was great.
Mark J.
This really is a great upgrade over the stock dust collector. Hooked to a good vacuum, it collects over 90 % of the dust from the mitre saw. Highly recommend it
Matthew P.
Solves the dust problem. Not a huge fan of where the recommended place is to zip tie the hose
Paul M.
It improves dust collection for thinner stock (3/4-1") but if you cut thicker stock the rubber gasket compresses and it is not as effective. All around a bit of an improvement over the standard Bosch collection
Gary J.
Looks like a winner!
Jack R.
I ordered the Bosch dust collection unit for my brand new miter saw!
Opened the box and noticed the assembly card was for a Dewalt system, and then confirmed the hardware was for a Dewalt system!
Packing slip in the box is for Bosch system!
So definitely a quality control issue! Now I am awaiting on my correct replacement product! Once I receive the correct product, I can provide a better evaluation!
Christopher S.
Shipping was a little slow, had to wait impatiently. (USPS)
Easy to install, video instructions were clear.
Works amazingly, catches 97-98% of sawdust.
Jerry D.
Perfect Fit, Good Instructions, Significantly improved collection.!
Brad L.
Perfect fit! I look forward to connecting the dust chute to a festool dust collector in the near future. By modding my Bosch, I saved cash, compared to purchasing kapex.
Steve G.
Love it, and does exactly what you want, eat wood dust! Also just received my zero clearance insert with dust collection for added help, Sweet Set Up.
Steve
