DANIEL O.
it works OK but not as good as i thought it would be.
Charles C.
Vast improvement over the factory dust collection. As others have noted, it does not get 100% but the reduction is substantial when paired with the recommended Inspire Woodworking zero clearance throat plate. I am mindful of the fact that these are 3d printed parts and should be installed with care. But once properly installed, if you are focused on accurate cuts and paying attention to your tools when woodworking I believe you will get good results and long life from this upgrade. Saved me days of designing, prototyping and refining of my own design. The dust in this picture is at the end of a full day in the shop cutting stock for a panel glue up.
Robert D.
Would have liked to have a written instructions (for us older folks) either printed or online.
It's a little self serving to have your customers to go to your YouTube video which in turns boosts your YT rating.
aultmon f.
Better dust control
Steven O.
Works really well! Super easy install and performs a 100% better than the original
Thanks so much!!
Ken J.
Went together as descried very easy to follow.
Greg D.
Great product! Works perfectly.
Carlton G.
I noticed a considerable reduction in dust collection after installing the product.
Kurt O.
This hose and chute collect the fine dust better than the DeWalt items. Some of the larger chunks get through the collection, however. All in all, it is worth the money.
Patrick M.
Works extremely well, gets most of the dust before my hood vacuum can. Finally dust free*
Paul T.
It definitely makes a difference with dust collection
John B.
Fit perfectly and works great!
Berj D.
This product represents a significant upgrade to any workshop. Its installation is straightforward, and its design is both highly effective and well-conceived. I regret not buying it sooner. The efficiency of the design and the substantial reduction in dust are amazing.
Thank you, Shop Nation.
Bush S.
works much better than the original equipment
randolph d.
Works great, easy to install, wish I did this long ago
John W.
This is a great addition to my DeWalt saw. This dust collection upgrade is far superior to the stock dust collection that came with the saw. The kit is easy to install. I just followed the installation video step by step and in less than 15 minutes I was up and running. Thank you for caring enough about the woodworking community to put the time and investment into this product to help us.
Michael C.
Excellent product, easy to install and it works great! Very satisfied.
Andre J.
The adapter works phenomenally, it collects at least 85% more than the previous setup I had. I highly recommend you invest in this for your miter saw!
Scott S.
So very easy to install! Worked perfectly for my DWS709!
AARON T.
This thing has saved so much time in cleaning and I’m not getting as many dusty boogers!
Devon W.
Rubber flap got cut on 3rd cut because it gets hung up on the fence. Also does not cut down on dust spread nearby like claimed.
Kevin M.
Huge improvement over the factory hookup. I was planning to build a box behind the saw to collect the sawdust, but the Shop Nation system works so well, that I don't need too now! Thanks for offering this product.
Jeff H.
Much better than the factory dust collection setup.
Denny T.
It works. Not perfect but 93% better than what I had. Thank you.
DAVID H.
I have installed and tested the new dust collection chute. So far very pleased. I had modified the original collapsing rubber chute that came on the saw so it worked fairly well but this is a huge upgrade. The Dewalt chute exited behind the saw then a vacuum hose attached which made it stick out substantially. This exits beside the saw which saves 6-10" behind it and works much better. Dust collection improved and the saw operation improved. Very pleased to date.
Raymond E.
I just installed the Dewalt 779 dust collector fro Shop Nation. Installation took about 15 minutes. If you can operate the saw you can install the collecter.
After installing I cleaned the area and then I cut hard maple. I would say that the collector collected about 90% of the dust. I am more than happy with the purchase.
Troy C.
This is an amazing addition to my saw. This is the second one I have. I put one on my sons saw then on my saw. Love it
Daniel Z.
This is an amazing product that offers a unique solution to a common dust collection problem. The available videos gave a lot of confidence to try out the purchase. The online store was easy to use, the upstates from customer service were promt, and the product arrived in good time.
Provided videos made installation easy. And the results are fantastic. While the OEM dust collection captures maybe 20-30%, this brings it to a clear 75-85%. The most noticeable difference is the elimination of the big dust cloud that would form around the saw during cuts (a major safety hazzard for lungs).
Dennis G.
Great upgrade to the factory system.
Shane S.
Best addition to my miter saw to date! Installation was exactly as shown in the installation video and took about 10 minutes. After installation I made over 100 cuts to 4x2's for a project I was working on. It made the cleanup in my garage really easy. thanks
chris w.
Huge difference with this attachment. Gets 98%of the dust .
Rick A.
Works so much better than the stock. Well worth the investment.
Mike J.
Easy to install and works as expected.
Jacqueline M.
Absolutely the best dust collection system for a mitre saw currently on the market today. Leaves and absolutely minor amount of dust compared to the factory supplied version on my Dewalt sliding compound mitre saw. Would recommend changing it out for this version, you will not be disappointed.
James L.
The design is good and the item worked well before it broke. The plastic used for the 3D printing is not suitable for the intend use. The shell is not solid and very fragile. Very disappointed that I paid so much for a fragile plastic piece.
Wade I.
Installation was relatively straightforward and it has markedly improved the dust collection. Well worth it!
Donald D.
Easy to install and works as advertised. Would recommend it if you are battling dust.
Steven
So far, nice improvement.
FRED K.
it works as advertised. not 100% of the dust, but %90 and this is a huge improvement
Vishnu R.
Send me hose transition piece that was missing in my packaging.
Michael David B.
Fit perfectly and dramatically increased dust collection!
James a.
Works good. Doesn't catch all the dust but it helps
Andrew S.
It works as expected. One minor issue: I use a Harbor Freight small shop vac for the saw, and the hose from the shop vac connects, but it comes off under use. It's a very simple fix though: I used some electrical tape to keep the hose in place. I see no need for any design changes, etc., but wanted to let you know the solution in case someone else has this problem.
James L.
Beef up in the areas of the screws and perhaps thicken the entire body.
James D.
Great replacement for the original dust collection tube. Works much better.
Robert
Rubber chute gets hung on veryical fence and touches blade. Reduces amount of sawdust being collected
Leigh M.
Installation was a breeze while watching the video. I was surprised by the difference in dust collection from stock. Wish I would have done this sooner.
Jay M.
It works as advertised. Props to the designer.
Werner B.
Fit perfect and far less dust!
MASON W.
Perfect, works great the way it should of come right from the manufacturer
Ron F.
Easy to install, and works great.
Larry E.
Explicit written installation instructions in the package would be appreciated
gregory d.
it is definitely better then the oem. instructions could have been better. very hard to get hose on fittings.
David E.
Works awesome, cuts down on sawdust. My opinion it should come with this option.
Travis U.
Definitely a much needed product!
Larry K.
The dust port fits perfectly and was extremely easy to install. It beats the hell out of the factory port!
Dennis P.
The dust collector works well when hooked to a vacuum. When not hooked up, dust and chips bounce off and are directed straight back at the operator.
E J.
Works pretty good, but I had the same issue as others when using the sliding function on my saw. The flap was just a bit too long and now has this nick which reduces the amount of dust that gets collected. Otherwise, works as advertised, just keep an eye on the flap when doing sliding cuts.
Ethan V.
Easy to install, makes a big difference
Thomas A.
After watching the installation video, it went together in less than 10 minutes. I made several cuts that would have created a sawdust mess all over the wall and in the air. There was a mere sprinkling of saw dust. Certainly a huge improvement.
Shannon
Very easy to install. It is very effective at dust collection. The space saving aspect was a must for me but the fact it works so well makes it a win win!
Long N.
Easy to install and it helps with the dust collection. Definitely recommend this product.
Donald R.
I just installed the new chute but haven’t used it yet. It looks like it will way better than the Dewalt chute does.
Christopher K.
Works great. Easy to install.
Keith R.
an update is necessary to the video. One of the reviewers noted that the flex tube threads on effortlessly in REVERSE! so it's not righty tighty, it's lefty tighty. I fought and struggled and finally gave up trying to thread it on. I then looked as reviews and noted the one telling us the 3D printed parts will not allow you to thread the tube on. He also told about doing it as reverse threads and BAM...absolutely completely effortless!! So far I love it because it's the ONLY adapter I have found so far that allows me to attach the vacuum pickup tube from my Craftsman shop vac. This adapter works perfect!! So yea, I'm pleased with this. We'll see if I have the struggle with a blade change that some others have noted. Even if I do, it's worth the extra step to have a good vacuum system in my small shop. I like also that you included and extra piece of shroud material.
JIM E.
So far so good... I don't use my saw that often; your product has been helpful. Thank you.
David C.
Not too sure if its just user error in installation but the amount of dust that it collects seems similar to the original dust collection.
Robin E.
Installation video was easy to follow, increased dust flow substantially.
Christopher M.
Great Product as advertised
John M.
I'd say the dust collection chute reduced my expelled dust compared to the standard Dewalt built in by about 90% . That which got by the collection was just nuisance dust, something I can easily vacuum up. I love this product.
JAMES C.
DUST AND CUTTING DEBREE HAS BEEN CUT TO A MINIUM
THANK YOU
Roy O.
The stopper on the slide broke in half and fell off allowing blade to to back and hit black part with clear plastic hose causing it to blow apart when blade hit it. . It didn't last 20 min .
Jeffrey R.
Great solution - works as advertised!
Scott R.
Pretty straight forward on assembly of system. Just working on hooking up dust collection to make the miter station complete.
Tim C.
Works excellent! Love it!
Kevin K.
Great product! Improved dust collection from 25% with DeWalt collector to 98 % with Shop Nation collector. Easy to install. Video is very helpful.
I did discover the purpose of the DeWalt collector. It's to prop the blade guard up making the Shop Nation collector easier to install!
Jay
Dramatic reduction in sawdust spray. Worth every penny!!
Roger T.
Worked as advertised on my DW718.
David
Great product. Helps collect the dust from saw blade.
Mark S.
No help when package was delivered to wrong address. It was my fault but I don’t know the people at that address and you made no effort to help, offer another, offer a discount for another. While the product maybe good customer service could use an upgrade. I was not able to retrieve the package nor did I buy another
UPDATE…..After 7 days of not hearing from customer service I received an email offering to send me another. That is what customer service should be. Wish it didn’t take so long! Thank you for your assistance.
Tim S.
It came on time and I installed it with ease.
Jeffrey S.
The dust collection is about 98% better than the OEM system. It was a bit difficult to install due to one OEM screw being difficult to remove.
Randy D.
Works much better then stock dust
Collector.
Tanya V.
My husband loves it
Mike S.
I enjoyed every aspect of this transaction. The part came quickly, installed with an easy to follow video, and is working perfectly on my saw.
Matthew M.
Wow it actually works so good!!
Alan D.
15 minutes to install. Works great.
Michael E.
Not sure. But it breaking like this after a couple months is not acceptable.
Ryan B.
Fit is great. Collects so much more dust than anything else I've tried. Great product you guys. I've already recommended you to some friends.
