Rémy S.
As promis, the improvement of the dust collection is significant.
RYAN R.
Better than stock!
Val M.
It works great. Much less sawdust on the saw and around the work area, I can it being sucked up the chute.
The adapter for my shopvac fit just fine.
This makes it much more pleasant to do the work, wish I'd found out about this a few months earlier.
Michael S.
Installed great just haven’t used it enough yet to tell.
Doug K.
Been watching your YouTube channel for a while. Finally upgraded my dewalt miter saw to a 12” slider. The dust collection is horrendous. Honestly, whoever put the “okay” stamp on that design should be fired. ShopNation’s dust collector was super easy to install and works great! Thank you!
Daniel R.
The vacuum actually works now!
Tapani O.
Works much better than the embarrassingly back stock DeWalt dust chute.
Michael L.
A bit disappointed with performance. Estimate that it’s capturing ~80%. Have a new DeWalt vacuum and dust deputy hooked up. Still have to complete a pretty major clean up after a session of cutting.
Edward W.
Works as advertised. Assembly video was spot on.
Judith J.
Taking off the old dust collection tube was more difficult than shown in installation video, but other than that installation of your equipment was straight forward.
Robert P.
Not the easiest thing to install but it works good.
Johnna M.
Works great. So glad I found your product.
John M.
Very good product. Fit was good and installation instructions worked great. Nice to have a better dust solution for this miter saw.
Gavin O.
It fits together easily and is a major improvement in the footprint of the saw
Ken S.
Very good at dust collection but must be removed to change the saw blade. I did not follow recommendation by vendor and used a dremel to open up the throat to allow blade removal.
This is the only negative I found
Yu feng H.
work better than the original
Andrew G.
Fit and function are great, huge upgrade!!!
Phillip B.
Monumental improvement over the factory dust collection. It works better than I thought it would even just hooked up to a shop-vac. Completely worth purchasing.
Dutch W.
Installed on the DeWalt 780. Using a 6.5hp Rigid Vac (have 3 dust collectors in shop) for mobility. In use since 1/1/25, not one that writes a review after 30 minutes of working the tool. When I cut aggressively (fast) I lose a little dust collection. When I operate at a slightly slower pace my collection is above 95%. This system works very well, some might call it outstanding. I have emphysema and copd from military service and have a great desire not to breath in dust. This fits my bill and then some. Thanks for a great product!
Hugh b.
Definitely works fantastic.
Cliff E.
Works better than expected, probably is collecting 90%+ of the dust now
Robert S.
I've been trying everything from using a different browser, double checking my email selection and anything else I can think of but it still wont't accept me.
John S.
Great innovation for collecting almost all saw dust!
Jason W.
Works great! Perfect fit for my DWS779..
Brian M.
All parts are well made and fit as advertised. This was an easy installation and the improved dust collection is exactly what I was looking for. Great job Shop Nation!!
Jess W.
Saw blade hit the rubber on the first cut because the extended fence was too close, otherwise it works fone
Angel
Huge improvement to my saw! Product as described and installation video was great!!! Thanks!!
Paul S.
Very well made and works well!
Mark A.
Great design, overall and vastly improved dust extraction with this add-on.
james b.
Works better than the original but it still lets quite a bit of sawdust by. I am glad I bought it but my son said he could have printed it for a lot less.
Daniel T.
This item was shipped to the wrong address even though I constantly was in contact with your company. I have not received it it will returned I asked for a refund and I still have not heard anything back from you guys. I have sent the right address through email. I would like to try this product.
James S.
Work as advertised and I am very happy with the results.
Kevin X.
Definitely a good upgrade. Now the shop is much cleaner
Daniel K.
This is the second purchase. The original one broke when a piece of wood was kicked back by the blade. The unit works great.
paul f.
big improvement glad i got it get one.
Tracy B.
Works great just like it shows on it you tube.
Kevin M.
Received it today. I am SHOCKED at the difference. With just a Dewalt Shop Vac I could HEAR the difference as soon as I turned on the vac. When I cut wood, every bit of sawdust went into the vac - NOTHING remained on the saw or workbench.
Installation was simple - recommend using a real torx screwdriver rather than the torx driver that came with the saw.
Other than order confirmation, there was no communication regarding shipping information, but I guess we are getting spoiled by the minute-by-minute updates from some of the larger companies. This would be the only improvement I could suggest, but the performance of the product far outweighs this inconvenience.
Don L.
some dust escaped the device, almost nothing.
Mike D.
Instructions were clear
Replaced the old part with new in under 20 mins
Andy V.
Works as advertised Nice product
Ashley A.
Did not fit my saw.
Stanley B.
Claims to fit my saw but dose not!
John L.
Item works ok. Not as good as I hoped it would be. Still a fair amount of sawdust around. Not much you can do, to avoid miter saw dust. They charge way too much for a 3d printed item as well.
Travis B.
Very easy installation, and the vast improvement in dust collection is amazing! Dewalt should install these on their saws from the factory. Its that good! If you are thinking about this product, just go ahead and get it.
David W.
The fit and function of this upgrade for my DeWalt Miter saw is awesome. Installation was easy and the performance is exceptionally good. I estimate dust capture to be well above 95%. It is a must for anyone with miter saws who want to keep their shop mostly dust free.
Randy D.
It does an amazing job with dust collection. Only regret is I didn’t get it sooner!
Richard B.
Works great better than what came on my saw originally thanks for the upgrade.
Chris M.
Dust collection seems to be a bit better than before.
Jonathan L.
Items look like good quality and work great!
Gregg E.
Went together well. Does soooo much better than the stock Dewalt collector.
Shawn P.
Exactly as I expected! Great job engineering a complete system that changes the way dust collection should work. Hats off to you guys!
Joe V.
Easy to install and works great!
Matthew J.
Install was easy and with a shop vac attached this catches 99% of the dust. If I could get my wife to turn on the shop vac while she uses it life would be dust free.
Kevin P.
The new dust collector for the Dewalt miter saw is vastly better than the original!
Dave M.
I have to tell you that I hemmed and hawed about buying this and I am so glad that I pulled the trigger. This product is a game changer. No mess or dust anymore. It keeps the garage clean hooked up to the vacuum. DeWalt failed and you guys made a great upgrade. Simple to install and amazing results.
Gordon S.
Doesn’t work very well with zero clearance or on a sliding miter saw, went thru the rubber shield within minutes.
Stephen L.
Great products and customer service!!!!
Anthony C.
Best miter saw vacuum attachment on the market. The dust collection is 100X better than the stock adapter.
Ish P.
Great product! Fits perfectly on my Dewalt DWS779 miter saw.
Jan W.
Didn’t get what I ordered and the attachments won’t stay connected. Need a redesign.
Thomas T.
I have not seen this product in the past.
In years past, I had a sheet metal hood fabricated that surrounded the back of my miter saw, with a 4-inch diameter dust port. It worked…but poorly. This product seems
WAY more efficient. I hope it works as planned.
MARK F.
Excellent product. Way better than factory dust collection. Hardly and sawdust to clean up now.
Highly recommend.
Christopher
Super easy install. The QR code video link that was included was awesome! Started cutting a scrape piece of pine and noticed a night and day difference from the stock dust collection set-up from Dewalt. Great product worth every penny!
William L.
Works great. Night and day compared to what comes with the saw. This catches the majority of the dust keeping my work space noticeably cleaner. Highly recommend.
Steve A.
It’s not quite as good as the advertising leads you to believe, but it is an improvement over the stock setup on the dewalt.
Sean B.
Worked as advertised at a fair price. I’ve only used it a half dozen times so far but seems to be comprable to the collection on my kapex.
Well done sir.
Gilbert C.
Easy to install works perfectly
Dan T.
it fit perfectly and improves dust collection significantly! Well designed and well made. When I bought it I briefly thought it was kind of expensive but now that I have it installed and in use I believe it was a bargain.
Keep it up. I am a beginning entrepreneur myself so I admire the business side as well. You idenitified a niche and a need and just nailed it with your line of dust collection. Well done!
Take care,
dt
Paul M.
I really appreciate the time it takes to generate a solution to one of the most talked about problems for an accessible, affordable saw used by pros all over the country. The biggest advantages!to this design as I’ve seen over the last couple of weeks in use are: 1) replaceable rubber flaps (one already ripped in transit, so I’m planning to source and cut replacements in bulk myself), and 2) the inner locking capability to form a tight seal with industry leading dust collection vacs.
Craig M.
Really improved my dust collection!!!
Christopher B.
Really professionally designed. Works great and the videos you install it were well done.
Aaron M.
It would be nice to be able to buy the STL, this print isn't very good, a few voids and bad layer lines. If I had the STL I could modify it to suit my needs better...
DIRK M.
I was a little disappointed that assembly was required. Not that it was difficult, just felt this was something that should be ready to go once it arrives. I've already torn the rubber up with the saw a little bit so I'm assuming you sell these separately when needed. Also felt that it would absorb more dust than it did, not all of it just quite a bit more. I think in theory it's awesome, would love to see a re-design so that it gets far more sawdust. Not sure if you could design a sliding or not sliding box of some sort behind the fence and allow the shop vac to attach behind the fence as well from the side. I see a homemade version on YouTube where some form of box was constructed this way. However, my guess would be you are a quality vendor and gives his best in products.
Nick
Works great, installation instructions clear and easy to follow. Great add to the saw!
Phil O.
This dust extraction kit is excellent - easy to fit, brilliant design, well built and after using a few times now Shopnation definitely underplay how much it improves the dust removal would highly recommend
Ronald K.
Pretty quick delivery. Easy installation. Works pretty well.
David W.
Fit as expected. Definitely reduces the dust footprint over the OEM solution.
Henry H.
Night and day difference, truly outstanding! Does an excellent job collecting dust on my DWS780. Hooked up with fittings to a 4" hose and 1.5hp dust collector.
David L.
Second saw with this product. Works great.
Donald S.
I had just purchased my Dewalt 780 miter saw not long before I purchased your dust system. The difference before and after the installation made it a huge improvement. I have a very small shop, so any debris or wood shavings not contained on some level would be overwhelming to work in. My first use was a 1 1/4" x 11" wide pine board and very little debris around the area. I did cut into the shroud during this cut (as you can see from the photo. I'm not sure how installing a zero clearance fence is going to work out. I also bought extra shroud material. Very much worth the purchase.
Riaan K.
Works as described, perfect fit and a great upgrade to the saw.
joe t.
Waaayyy better than the stock vacuum attachment. Would recommend 100%. If you have a good vac with good suction it is worth it!!
William M.
The components were high quality and robust. The installation video was very clear and I had no problem installing it. While it doesn’t capture ALL the sawdust, it is a huge improvement over the saw manufacturers included dust collection. I am happy with my purchase and highly recommend this to others.
Dennis S.
Works really great, I haven't really had a chace to use is bunch but I will soon.
Karen H.
It works great and fits great.
Christopher R.
Excellent product. Love it. Works so much better than stock.
Paul S.
Not picking up all the saw dust so I will be cleaning my vacuum cleaner.
Christopher G.
Easy instructions for both removal of original and installation of the new. Only one small adjustment and my dust collection improved 10X... Only small cleanup now when I'm done with a project.
gregory z.
This replaced a home made unit which worked fairly well but took up a lot of space.
I’ve reduced my footprint almost by half and increased efficiency in suction and debris collection. Can’t argue with that and good build quality to boot.
Glen C.
Ordering was easy and quick response on delivery.
The video was very helpful. It showed all the disassembly and install procedure with easy to understand verbal instructions.
Thank you!
Delonte J.
Much improved from version 7 I purchased a couple years ago!
Ray E.
Finally a product that lives up to its claims. Easy to install and works great!
Cody E.
It worked well once I removed a cheap dust extractor. The parts are just cheap. I think the 3d printed plastic could be better. When trying to swap the OD attachments, I cracked one with my hands. It was almost impossible to swap them, I don't like that design. The material for the pump I hope lasts. Was hoping it would be more shop vac / rigid / DeWalt hose quality. Plus, the zip ties are just gross. Pulling on some random saw cable for stability??
Matthew S.
Absolutely love this part. I've had my flexvolt miter saw for 7 or 8 years and love it but the stock dust collection was a joke. Even with an extractor attached anything behind the saw would get coated in dust with every cut. This part took minutes to install and captures virtually all of the dust. Extremely pleased and wholeheartedly recommend it.
