Gordon S.
Doesn’t work very well with zero clearance or on a sliding miter saw, went thru the rubber shield within minutes.
Stephen L.
Great products and customer service!!!!
Anthony C.
Best miter saw vacuum attachment on the market. The dust collection is 100X better than the stock adapter.
Ish P.
Great product! Fits perfectly on my Dewalt DWS779 miter saw.
Jan W.
Didn’t get what I ordered and the attachments won’t stay connected. Need a redesign.
Thomas T.
I have not seen this product in the past.
In years past, I had a sheet metal hood fabricated that surrounded the back of my miter saw, with a 4-inch diameter dust port. It worked…but poorly. This product seems
WAY more efficient. I hope it works as planned.
MARK F.
Excellent product. Way better than factory dust collection. Hardly and sawdust to clean up now.
Highly recommend.
Christopher
Super easy install. The QR code video link that was included was awesome! Started cutting a scrape piece of pine and noticed a night and day difference from the stock dust collection set-up from Dewalt. Great product worth every penny!
William L.
Works great. Night and day compared to what comes with the saw. This catches the majority of the dust keeping my work space noticeably cleaner. Highly recommend.
Steve A.
It’s not quite as good as the advertising leads you to believe, but it is an improvement over the stock setup on the dewalt.
Sean B.
Worked as advertised at a fair price. I’ve only used it a half dozen times so far but seems to be comprable to the collection on my kapex.
Well done sir.
Gilbert C.
Easy to install works perfectly
Dan T.
it fit perfectly and improves dust collection significantly! Well designed and well made. When I bought it I briefly thought it was kind of expensive but now that I have it installed and in use I believe it was a bargain.
Keep it up. I am a beginning entrepreneur myself so I admire the business side as well. You idenitified a niche and a need and just nailed it with your line of dust collection. Well done!
Take care,
dt
Paul M.
I really appreciate the time it takes to generate a solution to one of the most talked about problems for an accessible, affordable saw used by pros all over the country. The biggest advantages!to this design as I’ve seen over the last couple of weeks in use are: 1) replaceable rubber flaps (one already ripped in transit, so I’m planning to source and cut replacements in bulk myself), and 2) the inner locking capability to form a tight seal with industry leading dust collection vacs.
Craig M.
Really improved my dust collection!!!
Christopher B.
Really professionally designed. Works great and the videos you install it were well done.
Aaron M.
It would be nice to be able to buy the STL, this print isn't very good, a few voids and bad layer lines. If I had the STL I could modify it to suit my needs better...
DIRK M.
I was a little disappointed that assembly was required. Not that it was difficult, just felt this was something that should be ready to go once it arrives. I've already torn the rubber up with the saw a little bit so I'm assuming you sell these separately when needed. Also felt that it would absorb more dust than it did, not all of it just quite a bit more. I think in theory it's awesome, would love to see a re-design so that it gets far more sawdust. Not sure if you could design a sliding or not sliding box of some sort behind the fence and allow the shop vac to attach behind the fence as well from the side. I see a homemade version on YouTube where some form of box was constructed this way. However, my guess would be you are a quality vendor and gives his best in products.
Nick
Works great, installation instructions clear and easy to follow. Great add to the saw!
Phil O.
This dust extraction kit is excellent - easy to fit, brilliant design, well built and after using a few times now Shopnation definitely underplay how much it improves the dust removal would highly recommend
Ronald K.
Pretty quick delivery. Easy installation. Works pretty well.
David W.
Fit as expected. Definitely reduces the dust footprint over the OEM solution.
Henry H.
Night and day difference, truly outstanding! Does an excellent job collecting dust on my DWS780. Hooked up with fittings to a 4" hose and 1.5hp dust collector.
David L.
Second saw with this product. Works great.
Donald S.
I had just purchased my Dewalt 780 miter saw not long before I purchased your dust system. The difference before and after the installation made it a huge improvement. I have a very small shop, so any debris or wood shavings not contained on some level would be overwhelming to work in. My first use was a 1 1/4" x 11" wide pine board and very little debris around the area. I did cut into the shroud during this cut (as you can see from the photo. I'm not sure how installing a zero clearance fence is going to work out. I also bought extra shroud material. Very much worth the purchase.
Riaan K.
Works as described, perfect fit and a great upgrade to the saw.
joe t.
Waaayyy better than the stock vacuum attachment. Would recommend 100%. If you have a good vac with good suction it is worth it!!
William M.
The components were high quality and robust. The installation video was very clear and I had no problem installing it. While it doesn’t capture ALL the sawdust, it is a huge improvement over the saw manufacturers included dust collection. I am happy with my purchase and highly recommend this to others.
Dennis S.
Works really great, I haven't really had a chace to use is bunch but I will soon.
Karen H.
It works great and fits great.
Christopher R.
Excellent product. Love it. Works so much better than stock.
Paul S.
Not picking up all the saw dust so I will be cleaning my vacuum cleaner.
Christopher G.
Easy instructions for both removal of original and installation of the new. Only one small adjustment and my dust collection improved 10X... Only small cleanup now when I'm done with a project.
gregory z.
This replaced a home made unit which worked fairly well but took up a lot of space.
I’ve reduced my footprint almost by half and increased efficiency in suction and debris collection. Can’t argue with that and good build quality to boot.
Glen C.
Ordering was easy and quick response on delivery.
The video was very helpful. It showed all the disassembly and install procedure with easy to understand verbal instructions.
Thank you!
Delonte J.
Much improved from version 7 I purchased a couple years ago!
Ray E.
Finally a product that lives up to its claims. Easy to install and works great!
Cody E.
It worked well once I removed a cheap dust extractor. The parts are just cheap. I think the 3d printed plastic could be better. When trying to swap the OD attachments, I cracked one with my hands. It was almost impossible to swap them, I don't like that design. The material for the pump I hope lasts. Was hoping it would be more shop vac / rigid / DeWalt hose quality. Plus, the zip ties are just gross. Pulling on some random saw cable for stability??
Matthew S.
Absolutely love this part. I've had my flexvolt miter saw for 7 or 8 years and love it but the stock dust collection was a joke. Even with an extractor attached anything behind the saw would get coated in dust with every cut. This part took minutes to install and captures virtually all of the dust. Extremely pleased and wholeheartedly recommend it.
Daniel F.
Easy to install and a huge improvement!
James A.
100% increase over the original from Dewalt ! Very happy so far way cleaner and more room too !
Chris D.
Very happy so far. I replaced a similar dust chute I bought from another shop last year. It collected some dust but not as much as the Shop Nation chute.
Mick S.
Great product. No issues fitting it to the saw.
Qulaity product with quick delivery (to Australia)
David M.
Fits the dws709 and works well. Far better than the original system.
Andrew H.
It arrived quickly, was easy to install and works great! Better than stock!
Tim C.
This has made the biggest difference in dust management when using the miter saw! The miter saw dust collection attachment has eliminated the need for a dust hood. If I forget to turn on the vacuum, I'm immediately reminded how well the Shop Nation miter saw attachment is working.
David M.
not perfect, but better than the stock dust and chip colection! worth the money.
Sweedenburg F.
I love the genius design and how flawlessly it integrates into the existing mechanical setup. One of the main issues with the DWS780 is the dust collection port being at the very back of the saw and this completely reroutes the hose, fixing multiple problems with one kit!
Daniel S.
Bought this one to replace one that broke. At first I wasn't going to replace it but after using the saw for a while without it, I really noticed the difference it makes.
Chad B.
It seems to be better than the stock system but it’s far from flawless. I use a rigid shop vac with 5hp and 12 gallon and not sure it’s that much better than stock to have justified the cost…
Pierre B.
So the install easy, watch a YouTube video for guidance. This cuts and picks up well, for flat stock items. Anything taller than a few inches the rubber guard gets caught and torn. For example, don’t try and cut baseboard 3.5 or higher.
bashar k.
Works a lot better than the factory one.
David C.
So far so good but still waiting to put it through it’s paces
chad
Got it, installed it, used it, works great
Mark P.
This attachment was easy to install and really keeps sucks up the sawdust i don't have a true dust collector so my shop vac works ok .
Thank you for a great product.
Guillermo d.
Installation was pretty easy! It works great, I get very little blow by. I use to get much more and this has helped control the dust in my workshop
Dennis M.
Gave it 4 stars. Definitely a big improvement over factory supply dust collection. Works great with wood but not as good on PVC products. Not sure why. I’ll check my setup and see if I can improve anything.
Virgil L.
I tried different systems and this one is by far the best!! Not perfect but 85 to 90 percent less dust going all over the place!!
Super happy with it!! I highly recommended it!
Terry L.
Chute works...which is more than can be said for the original, which was essentially useless. The only challenge during installation was eventually realizing that the new chute REPLACES the rear blade guard AND the original chute. Otherwise, installation was painless, thanks to the video.
Rudy R.
Easy to install...works as expected.
ANTHONY G.
Installation was easy and efficient.
I was surprised that the items was 3d printed, did not expect that. However it still assembled very smoothly.
I have it attached to a installed vacuum that will turn on when ever you pull the trigger on my Chop Saw. I worked effectively. Not quite as well as I had hoped, however it did indeed cut down on the sawdust.
Miguel O.
Definitely better dust collection overall than before but on certain wood products, e.g. press board, it still leaves quite a bit of sawdust upfront.
Kyle M C.
When it’s working great, it works great!
Easy install / video was super helpful.
I had to remove the fence , because when I used my OEM fence it pushed down the rubber flap. So I was cutting 2x6s and it caught the rubber and destroyed it.
I’ve removed my fence , and it’s improved since then. It just sucks because now I can’t cut as many boards at once . But oh well
Craig M.
I've been using this mitre saw all day and this is how clean my area is! This product works.
Randy M.
This item fit extremely well and the dust collection is outstanding highly recommend it to everyone
Martin T.
Really easy to install, dust extraction a lot better.
Amira L.
Great product and was delivered quickly!!
Ryan O.
Does exactly what it claims to do, and very well. My garage is much cleaner after running my miter saw now.
Leo D.
Incredible the percentage of sawdust removed with this attachment, but the best was putting the SN sticker on my saw.
Brad W.
Works great. Very nice saw upgrade. Would buy again.
Dennis S.
I had put one on my older Dewalt saw couple years ago and it was like night and day for controlling the saw dust - Since than I got the Dewalt 780,first thing I did was ordered one for this saw - As I mentioned before a great way to handle the saw dust.
Tom F.
My new vacuum device lasted all of 2 days. I had a piece of lumber kickback and broke the plastic housing.
Thomas R.
Works as designed. Installation was easy. I suggest to review the installation video.
Drew L.
Install was easy. I will say I feel a little lied to, unless I'm doing something wrong that is. I feel like all the videos I've seen with this there virtually little to no dust. I feel like since I switched to this dust shroud I'm still getting a lot of dust all over the place.
Jon M.
So far so good. Easy install. It works with the DHS790. You should update the website.
Steve C.
Brilliant concept, excellent product and service. Thank you!
John A.
Doesn’t collect dust like advertised.
I use this on Dust Collector and dust still goes all over back of miter. Your product stinks. Waste of money!
Paul P.
Much better than not having it but expected little less saw dust. But still give it a thumbs up
Jeffrey M.
I will upload pictures later. I really like the DeWalt DWS779 Sliding Miter Saw Dust Collection Upgrade unit, it performs a thousand times better than the stock DeWalt DWS779 Sliding Miter Saw Dust Collection. The saw is almost dust free now. I only have one issue with the dust collector upgrade, the rubber chute, it doesn't go far enough into the channel, so when the rubber hit the piece of wood, I was cutting, it ripped at the screw attaching point, it was right on the edge. I am in the process of making a new chute out of vinyl and leather with mini eyelets at the attaching points and using mini nuts, washers and bolts for the through holes to help prevent tearing the chute. I will let you know how the fix goes.
William H.
Night and day difference. I should have pulled the trigger on this upgrade sooner. Much appreciated.
Jason B.
This only works for simple cuts that don’t need a tall fence and with cheap blades. It gets in the way when cutting bevels on trim upright and has to be removed to change out blades when using a high quality blade. Turned out to be a waste of money for me.
Dan H.
Miter saw the worst dust collection tool that I know of. My 5 inch random orbital sander has better dust collection. Much better than it was before. Good product.
Richard A R.
Very happy with this purchase and glad I bought it.
It's worth the money.
Three observations:
1. It's grabbing 75% of dust with my dust collection system, which is a tremendous improvement.
2. The slot for the rubber "shield" could be deeper.
3. Installation was easy peasy.
Thank you for developing this!!
Stephen E.
It does work better than the stock dust chute and collects about 90-95% of the dust. It’s probably one of the best dust collection solutions out there. Very impressive. This is one of the cheapest and most effective upgrade you can make to your Dewalt 12” inch sliding miter saw.
Melvin G.
Easy install and it works great.
Sister Syncletiki G.
I gave it 5 stars, it works very well and is a great improvement. Thank you !
Ted E.
Works great. Thanks.
David G.
Ideal for the shop. We used it on site for a large trim job and had some issues. The vinyl flap gets torn when you put the saw on compound a compound mitre. Also had one break from a small piece of material that got loose.
I think for the shop, on a stable base and mostly 90 degree cuts, it is a nice addition for dust control.
Doug W.
Such a simple yet brilliant solution to a horrible stock dust control system. You won't regret buying this!
Rian F.
Better than the OEM version, but not as good as i was hoping or expecting.
Lars M.
Super excited about these dust collector mods. I run a crew of finish carpenters all using the DWS780. These are the perfect upgrade as the factory collector sucks!
Charles M.
Not gonna lie. I was skeptical. Installed it within 5 minutes and was pleasantly surprised. Of course now I’m emptying my dust collection more often. Beats sweeping up the mess I had with the factory dust collection.
Jim B.
1,000 times better than the POS dust collection that came stock from Dewalt. Very easy to install. I would recommend this product.
Jeff M.
This fit my Dewalt DWS782 perfectly. I was surprised to see a steady stream of saw dust go right up the chute instead of all over the back wall. A great improvement from the factory design. Well done.
Josh M.
Fits great! Wish I had seen the 3d print file option before I ordered, but still happy with the design and quality. I have a small shop vac hose that is smaller than the main attachment. Not an issue with the design, just need a reducer option.
