John V.
Easy to install. Good instructions on the video Haven’t used the saw with it yet so can’t comment on capturing sawdust.
jeffrey w.
until the blade is all the way down and back it does nothing so dust collection is ehh. and its so wide it catches on the fence all the time. had it on for 1 day cutting crown and other large trim and the rubber edge is junk from getting hung up constantly. removed. the stock dewalt works better
Chad
Love it! The fit is perfect and works like a charm! I definitely recommend this product.
Steve H.
Great concept. It made it two days on the jobsite before a oak sliver shot through it. The aftermath of the 3d printed pack was explosive. Went through a rubber flap the first day. Then catastrophic failure the next. If the collector was made out of metal it would not have exploded.
You do have to remove a blade safety when installing this device.
Again great concept but no one can afford to have it fail every two days. We did not reach out to the company after this happened based on other reviews we have read. We're not saying don't buy it. We just didn't find the device to hold up compared to the stock part.
Richard C.
Pleased with the purchase and goods. Install was straight forward and has improved the dust issues.
Donald T.
I’ve had my Dewalt slide cut saw for few years before I bought house and hated the vacuum vent system. So I went surfing the web and found your company online. I’m in the middle of demoing and remodeling our kitchen but haven’t used it yet to installing the Kitchen cabinets and trims.
Philip H.
Works well. Only issue is the provided connector isn't a perfect fit for 2-1/2" (too tight) which is surprising because I would think that it would be the most common size.
Connor H.
Easy to put on and works wonderfully.
Jim R.
Didn't see much improvement.
Edward M.
Quick delivery which was very helpful. Instructions for use very comprehensive. Easy Peasy!
Josh S.
Excellent product, does exactly what they say it would do.
James N.
This was very easy to install and works amazingly! Night and day difference between your dust collection and the OEM. Highly recommend!’
Roger B.
Install was simple and has provided the dust collection I needed
Nick B.
Works even better than I had hoped. Huge improvement over the manufacturer’s dust collector.
TIM L.
Works as advertised
Joe R.
Absolute life saver! Easy installation, works great, and keeps dust at a bare minimum. Will be purchasing again for my other saw.
Ryan S.
I have had your dust collector installed for about a week now on my DeWalt 780. It is a good improvement, but could use some fine tuning. I'm a residential finish carpenter who uses my miter box daily. I installed as per instructions, but the rubber flap has already torn off from the mounting screw on one side. I think the rubber flap needs to be narrower so it doesn't interfere with the back fence. Also the hose is interfering with with slider when connected to vac hose, I broke off one of the tabs already the connect to zip ties. I think it would be better it the dust hose 90 degreed up with elbow so it wouldn't interfere with slider on saw.
Russ C.
it worked pretty well
Joseph M.
It was easy to install and works great. Very little dust left to clean up.
Robert M.
Great dust collection!!!
RICHARD M.
Easy install. Have only cut a few things but so far seems to be working great!
Dennis L.
Good quality 3D printed parts, and Instructions were very helpful. Will buy more parts in the future.
Dennis
Randy R.
This is the second dewalt sliding mitre dust collecting I have purchased within the last 6 months.
Both seemed to work well in the beginning however they don't seem to last .
I am retired so I spent $112 dollars, that I felt I just threw away.
Robert E.
Easy to install and it catches a lot more dust than the factory installed unit.
John T.
Well designed and thought out dust collection!
Pat T.
Dewalt should really incorporate this into their stock product. Their OEM dust collection vent requires an enormous amount of real estate if you want to hook up a hose to it and it doesn't gather a whole lot of the dust. This Shop Nation dust collector probably grabs over 90% of the dust coming off the blade. There's no way anything is going to get it all, but it's a big improvement.
Greg A.
Very pleased and a definite improvement over the stock dust collector
Giovanni S.
Very pleased with the results.definitely makes a HUGE DIFFERENCE.
Steve C.
My DeWalt sliding miter saw has been making my shop a mess for the last several years. I bought a dust extractor but knew that it wouldn't help much with the stock DeWalt setup. I ordered the Shop Nation kit and installed it as soon as I received it. My dust extraction hose connected directly with no extra fittings. I cut a few test pieces and was amazed at the results! Why did I wait so long to buy?!
Brent O.
I haven’t had a chance to install it yet.
Charles L.
I teach High School R.O.P. Carpentry and my students use the Dewalt 780 with a zero fence for a lot of their projects. The original dust collection (if you can call it that) was driving me crazy. The Shop Nation dust chute works great; huge improvement. All the parts fit well, super easy to install, very clear instructions.
Steve M.
It was worth the purchase and I'm always happy to support independent innovation and the unit did operate more efficiently than the OEM intake but the hose routing was more awkward and the hose adaptor on the end of the hose did break after about six months.
The hose over the motor housing has to be improved in it's routing some how to reduce movement when using the saw and be a bit more secure.
Still, happy with the purchase.
Dianne m.
This thing works great, nearly 100% collection.
Dale R.
Works great. Much better than the saw manufacturers original.
Lewis Z.
Great product. Fits extremely well and works as advertised.
Ben E.
Printed section that holds the flap is very flimsy. Good idea, okay execution.
Brian H.
We received and installed the Shop Nation kit on our DWS780 last week. What a difference over the stock chute. The kit was easy to install, arrived fast, feels high quality in the hand and we are very happy with it. Great upgrade to any saw.
Mark C.
I didn't see much improvement in the dust collection, but not having the hose on the back of the saw is a good improvement.
Jeff J.
Works beautifully! What a night and day improvement over the original.
Greg C.
The only reason I didn't rate it higher is a cut some 4x4's and the rubber got caught up in the blade. Other than that, i think it's a good product
David C.
great add catching the dust but loud suction sound from shop vac attached
Bruce K.
It did not fit. The how to video was inaccurate and did not match the Dewalt saw. I returned the device and am still waiting for the refund
John C.
Cuts down on the dust spraying all over.
Stephen E.
Product worked ok for about 2 weeks until the 3d printed plastic shattered and launched pieces all over my shop while the blade was on. A small end cutoff piece must have hit it and it immediately shattered.
Nathan C.
Install instructions are great. Product works way better than the original DeWalt dust tube, however, there is more sawdust that escapes than I would have expected. Overall, I am happy.
Ruben C.
This is an amazing accessory and addition to my miter saw (DW780)
Gary M.
Was a bit difficult to install because of the saw's design - it's hard to get at one of the screws holding the blade guard. Once I was past that it was a cake walk. Initially I had to go wide on a piece of plywood to cut my zero clearance tape. Made a huge mess. The flap got caught in the blade :( - obvious user error. When i did some cuts on 2x4s the results were very impressive (as the photo shows). Far better dust control which is important since I'm building a new miter saw station inside my shop. YAY
Ronald B.
Outstanding upgrade to the Dewalt dust extractor. Highly recommend.
Robert L.
Worked great - the video instructions were very helpful.
Jeff K.
Shop Nation bring the top quality products and designs for practical solutions. I’m a repeat offender and will continue to be. Great job!
Paul O.
I found that removing the blade made installing easier and safer. One of the screws to the old shoot was a bear to loosen. I needed to remove the blade to get the leverage to loosen it. Other than that installing was easy. It works way better than the old dust collector but you will still have dust to clean up when done
Kevin F.
Ordering was easy, shipping was quick. The installation video made install a breeze.
Doyle S.
It is 100% better.
Tony F.
Easy install due to good instructional video. Works great. Huge reduction in sawdust
Charles D.
Very impressed with the device. Easy to install, fit was perfect and does a much better job than the stock dust collector. Im still going to mate it with a dust hood.
Im glad I purchased this product. Money well spent!!!
Charles M.
Never received product.
michael m.
Works great . Nice upgrade for dust collection compared to stock
MIchael M.
I like it, so much an improvement over what came on the saw.
Rodger B.
What a fabulous product! This dust collector is so much better than the original dust collector that came with my machine. The installation video was very easy to follow and very helpful. I would greatly recommend this product
Steve H.
Worked just as promised. Thank you so much.
Steve H.
ANDREW H.
This really does improve dust collection over the OEM that comes with the saw. It’s not dust free, but it’s considerably better. High quality and easy to install. I highly recommend.
Karl H.
With my DWS780, the rubber skirt on the lower half of the dust collector has a tough time passing through the fence.
This happens due to the slider mechanism on the saw.
I’ve been able to remedy this by having the saw in the fully upright position before sliding it towards me to “hop the fence”. I.e. when cutting a 1x10, normally I wouldn’t have to put the saw all the way up to make the jump over 3/4” stock. (I hope that made sense)
The only true inconvenience is changing the cutting motion which has certainly become muscle memory over so many years. Otherwise a well thought out and produced product.
Byron J.
Easy install works great!
James C.
easy install
works great, much better than the OEM
even gives me another inch of wall clearance.
wouldn't mind a bit larger hose though
Thomas C.
Love this thing. It works amazing and the company has fantastic customer service. My post office put it in the wrong mailbox, but the company sent out a new one to me ASAP. I bought it for a new workbench build, and it made a night-and-day difference in dust collection. It only took a few minutes to install, and it works really well. Love it. Worth every penny.
Gray S.
1st order UPS messed up. Contacted seller and they sent another right out. Great communication and product is great
Jon C.
Isn’t picking up all the fine dust, but that could be the shop vac I am using.
Much better than original
larry L.
It works exactly as advertised. Installation was easy. I just wish I could make my table saw stay that clean.
Robert R.
The shop nation dust collection system for the Dewalt mitre saw is easy to install - important to follow the video from start to finish. The actual dust collection is an improvement over the Dewalt 779 mitre saw tube collection system. It collects approximately 80% of the saw dust, which is an improvement over the original.
Daniel
Did not fit Rigid hose. Probably my fault
Richard F.
I do find it cut down on the dust more then what came with the saw. Installation was easy. Now I just need to turn on the vacuum every time.
Gregory J.
This combined with the vacuum throat plate picked 90 percent if the dust. Pretty darn good.
Brad L.
I still have not received it.
Blake S.
Easy to install! Great dust solution for my saw.
Robert S.
Very easy to install with the included video, and sawdust collection works so much better now!
Richard D.
Installation was very straightforward. The video was a huge help. The part is well-designed, so well, in fact, one has to wonder why the saw manufacturer didn't do this in the first place. I can heartily recommend this to everyone.
John K.
Works better than stock
David S.
Works very well. Much more dust collected than with the factory provided collector.
Michael G.
Great design, easy installation
Manuel R.
Installed easily.
Works great, much less sawdust.
Paul M.
Great product. So much better than the stock dust collector. Very happy
Michael F.
What a difference! And the installation video made the entire process an easy five minutes. Thanks, ShopNation!
Paul R.
The dust collection device is an improvement over the stock dust collection, but it’s not great.
Gary B.
What a difference! Very well thought out product, excellent fit, and easy installation.
Ed R.
Huge improvement. It removes 90% of the dust compared to about 30% with the oem set up.
David C.
Works great! Super easy installation and keeps my miter saw station nice and clean. This is my second purchase (I also have a DeWalt DWS716) and Shop Nation does not disappoint.
Erin R.
The design works for the most part, collecting most of the dust, however there’s a lip where the rubber shield meets the plastic mechanism and causes kick back of dust. I have mine hooked up to my Dewalt vacuum and unfortunately still does this. It’s not much but enough that I still have to vacuum my shirt off after a few cuts.
David M.
Great product. Much better than the original dust collection.
