Charles C.
Thing fits like a dream. Couldn’t ask for anything more. Picks up most of the dust if not all. Really happy with the product.
William P.
Wonderful!!!! Super easy to install and made 110% difference!!! Best add to the shop!!!
Will
Patrick M.
I was pleasantly surprised by the amount of dust collected. Great purchase!!
rob s.
There needs to be a better way to fasten the end of the hose to the saw and a adapter to use the filter bag out in the field
Garry F.
Easy swap with much better effectiveness
Trevor F.
Was easy to install and works great
Michael A.
Works great but they don’t last ….. this is my 3rd one never again
Chad P.
Well designed, well made and easy to install. Doesn't get 100% of the dust but is far superior to factory collection. Worth the price!
William P.
It works great, but the air flowing through is very loud.
Joe M.
Have just finished the install. The video was very good, easy to follow. Not sure why others complained about it. Took approximately 20 minutes total. Time well spent.
Alexander V.
This is my 2nd one! FREAKING LOVE this device - really kinda surprised that manufacturers aren't incorporating this into their design.
Insanely efficient - very easy to install. Just love it.
Thanks!
James
Everything fits fine an does everything that was advertised
Andrew K.
Fits perfectly. Haven't had a lot of time to test it. Took a second to figure out where to strap the tubing so that it didn't impinge on the sliding action, but I got it set up now and it looks like a great addition.
Jim W.
Fits great and works well. I recommend to anyone with need to replace their original dust chute
Gerry B.
I would share pictures, if I could!
My shipment has been bouncing around in the USPS system since early July. I have had no luck getting your team to help me or getting USPS to help me.
SOMEONE AT SHOP NATION, PLEASE HELP!
Mark D.
Extremely well made. Excellent installation instructions. Has made a major difference in the amount of dust in my shop. Works well at all cut angles. Get one, your shop will be cleaner and your lungs will be clearer.
Luc C.
We cut cardboard boxes. Bought our second chute recently and it didn't last a week.
Plastic chutes are too brittle.
Would like to find one made of aluminum.
Lisa D.
My original part was damaged this was the only replacement I found so bonus that it also helped grapped more dust not all of it but every little bit helps
J. B.
Works great. I’ve tried numerous ways to make my miter station dust free with no luck. This works great!
Andre
This product was an absolute perfect fit totally would recommend
Toni L.
I'm very sad that you don't have it for the Ridgid 10" sliding miter saw.
I purchased the 12" one trying to make it work and isn't working much, but better than nothing.
Hopefully you'll get the product soon for my tu purchase.
Robert E.
Works great! A lot better than I ever thought it would. I cut a lot of lumber building walls in my basement shop and very little dust!
Rita W.
Fit perfectly. Fast shipping.
David S.
Quick delivery. Once set up, it improved the dust collection significantly. Very satisfied.
patrick c.
Works alot better with it, than what came with the saw.
Shawn V.
Works as it should
Norman M.
Works great especially when cutting pvc planks
Mike N.
Disclaimer: so far we have only cut PVC decking with the new dust collection system. If you have never cut PVC decking it makes a huge mess! This system works well to help collect the shavings. Depending on the type of blade you are using (fine finish or framing) that will change the effectiveness of the actual vacuum system. By that I mean if the shavings are larger/heavier the vacuum system struggles to pick them up. That part has nothing to do with the dust collection pieces from shop nation though! All in all we are happy with our purchase and we think it is effective for what we needed.
Chris F.
Fits well and from use so far seems to catch more sawdust. Happy with the purchase!
William B.
Works great! Hooked up to my shop vac there is virtually no dust. Love it!
Fred G.
What an incredible upgrade to my Ridgid saw. I am not exaggerating when I say that it captures almost 99% of the sawdust. I’ve already shown a few friends and they were really impressed. Great company and a great product
Philip P.
Works Great!!! Really helps collect the fine dust.....Easy enough to install by watching the video.....Highly Recommended....
Jeremy V.
Love it! Works great and easy to install.
Steve M.
Gets about 90+ % of sawdust coming off the blade.
Howard B.
Worked as I had hoped.
Earl J.
Best addition to my shop, works as advertised!
Robert W.
Used less than 5 times, snapped. Worked well when it was working.
Tim C.
Easy to install and made and incredibly difference in capturing sawdust.
Aurelio O.
Seems to work well. Not 100%, but what is. Takes a LOT less room than what I had before. I still wear a dust mask.
Kim W.
Finally a dust collection that actually works for a mitersaw! Thank you!
Nicholas H.
I liked the Bosch version so well I surprised my good friend with the Ridgid one. He’s absolutely amazed at the difference. He’s a general contractor and does work in people’s home quite often. He said it’s so helpful in those situations and his clients are pleased as well. He said it makes him look more professional
Joe H. F.
Instructions on how to install could be better. I loved it until I was cutting a board at a 45 degree and the brand new rubber got cut because it got caught up in the way of the saw blade. I had to cut away the damaged area.
Curtis L.
Great product just as advertised and promptly shipped.
Jon Z.
Easy to install and a good fit. Tighter clearances than OEM so it works 1000 times better at collecting dust, as long as I remember to turn on the vacuum. Does get in the way when cutting 4x materials, especially evident at extreme miter angles. Wish there was a better way to secure the outlet end of the hose than zip ties, that also doesn't get in the way upon using the sliding feature of the saw.
Scott M.
With a link to the install video, this was an easy attachment to make. Everything fit perfectly. One suggestion to others installing this product, get a few push pins handy. When attaching the rubber scoop to the plastic cowl I found it a bit awkward screwing in the very, very small screws while also trying to keep the rubber scoop aligned in the track. So, I use push pins to hold it in place where the other holes were located. Then I just removed the next in line so I could screw in the very very small screws. A younger hand might have an easier time with this but, at 62, dexterity isn’t my strong suit.
Rick
I broke the first one so i purchased a replacement. Great product
Ryan W.
Everything was an exact fit and very easy to install. I look forward to other things they have!
Liane H.
Thank you for the quick shipment. On of our workers broke the collection chute, so we purchased 2 additional just in case. Great product and great service!
Mark S.
the added chute works great and is a good investment
Marco B.
I haven't installed it yet but it looks great. I'm sure it will keep the shop cleaner.
Ryan
This actually works really well. I’d encourage the person to came up with this to do even more kinds of things!
Alan F.
Needs a little more space to allow for the blade to be removed without removing the collector.
Also need to allow a little more material around the rubber where the screws pass through.
William G.
Installed it on my 12” Ridged double compound slide. The rubber dust catcher gets in the way when I’m standing on edge a 5 1/4 baseboard had to cut the rubber back to get most of it out of its way but it’s still not enough. also, the flex hose connected to a shop vac nowhere to mount it gets in the way of the slide.
Sam B.
Night and day difference, would definitely recommend and also purchase again. Great product
Mike Q.
Cutting 1 1/2 x 1 1/2 stock. 1” pice kicked back and shattered the dust collector. Have you upgraded to a more durable print material other than standard pla?
Jarrad W.
Works great and was easy to install.
Dave Y.
Fits perfectly & easy to follow instructions.
William S.
Works great at catching extra saw dust. Flap could be a tad longer.
Gabriel
This was super easy to install and a direct fit to my saw. Dust collection is a whole lot better compared to the factory dust collection and pairs nicely with my Milwaukee dust collector. I would highly recommend this item to anyone looking for a way to help cut down on the mess from a miter saw.
Cheryl M.
Worked great. Thanks
Bernd W.
This product works great! Really cuts down on dust. Wish I would have found you guys sooner.
Thanks for the help.
Bryon M.
Works as advertised, does a great job, glad I got it!
Edward K.
Collects dust very well. I'd say 95% efficiency. Easy to install. Will not work with a zero clearance fence.
Daniel R.
This ingenious device has helped dramatically reduce the dust in my shop! I love it.
Wayne C.
Awesome product and works better than I expected!
Niels U.
Works great right out of the box!
Rick G.
Gets a good deal of the sawdust (major improvement). Quality design and build. My only issue is you must get creative with dust collection hoses/adapters.
Luc C.
fit perfectly as described
Philip P.
Should included the two additional adapters. Now I have to use tape to connect the vacuum.
carl h.
The best dust collection I've ever had on a miter saw , has captured 90% of sawdust
Shane B.
Easy install, love how well it works with my shop-vac. A huge upgrade over the stock dust port on my Ridgid chop saw!
Michael B.
Part did not fit. I knew there is not a direct fit dust collector for my specific saw, but took a chance anyway. Hopefully they will develop one soon. Delivery and packaging were acceptable.
Mark H.
Huge improvement over what comes standard (basically what comes standard on both my miter saws is completely worthless), but was hoping it would catch more than it did on my first couple uses. Hoping a big part of it is my existing shop vac is just not powerful enough, and an upgrade to a more powerful shop vac or dust collection system will add to what it catches. I would buy it again, but can’t quite give it a 5 star yet.
Larry H.
Couldn't cut anything over 4 inches high. It would catch the back of the wood and pushed it into the blade.
Timothy M.
Easy to install, works as advertised.
Ron N.
Really well thought out
Barett D.
Very disappointed in the dust collection. I see no improvement over the original Rigid connector and the cheap rubber material that is screwed to the printed plastic piece tore after the second cut because it runs into the board being cut. This has the look and feel of a $3 part (zip ties to mount the hose?) but is priced like a professionally made product. I feel like I got ripped off and I probably won't buy anything from ShopNation again
Brent S.
The dust shut mounted easily however I found the flexible hose lacking in length especially when using the saw extended for cutting wide pieces.
When doing that the flexible hose was stretched to its limit.
Scott L.
Easy to install, works like a charm. No more vacuuming and blowing off the mitre saw before I put it away anymore. And no more cleaning up the floor in the shop either
Kevin D.
Just what I was looking for and glad to support a small business.
Larry C.
Great fast shipping product looks and feel great haven't installed it yet but very pleased with it and big fan of your YouTube channel thanks again
Chris
Far superior dust collection vs. stock collector.
Shawn W.
I purchased one of these a year ago and have been loving it, I then made a mistake and had a kick back when cutting a 4x4 and it blew the dust shoot up. (always wear safety glasses!). I only needed a few pieces but couldn't find them on the site for sale as individuals so they gave me 50% off to buy a whole new kit. Beset upgade for the miter saw you can get!
Evan M.
Bought it for the 10” R4210, only used it twice, works very well for straight cuts, anything passed a 30 degree bevel and the chute has to be removed or else it risks getting cut by the saw which is unfortunate, but also this was designed for the 12” saw so I’ll take what I can get.
Christopher M.
I’d rate the 4.75
The dust port is a huge improvement, there is not doubt about that, although What I didn’t know is the rubber boot is a consumable product an I would have ordered additional ones because on my first cut the blade cut the boot on its first bevel cut. The fence pushed the boot at the right angle it nicked the blade. I have noticed the same experience on another brand saw so it’s not specific to my saw. This product is a solid 4.75 . I really like how the hose an fitting swivel together with out unlocking great design!
I say it’s improved the dust flying all over the saw an mess 90% better!
Solid product so far!
Brian K.
Works awesome love the hole setup.
gary w.
Game changer on my Ridgid Miter Saw! Great dust collection, unlike what was on the saw from the factory.
Fred P.
It works well and was easy to install. I do think the silicone flap piece could be a half inch longer so it could catch a little more blow by dust. I do see an issue with the flexible hose pinching on the slide going back on the crown lever. 12" saw has quite a bit travel. Compared to the factory dust shoot this is a good upgrade. I hope the flexible hose has a decent life span, as it seems to do a lot of travel. I don't know if it is possible to have a 6" rigid tube on the collector before the flexible hose is attached to help with the travel and the hose pinching.
Kevin N.
Easy to install. Works great!
Judy C.
Easy to install. Hose provided was way short to use as noted in the You Tube instructions. If you added 2-3 more inches it would be the best. I had to improvise. Not sure long term with improvisation but right now I like how much it does capture.
Patrick G.
This little device captures at least twice as much of the sawdust as the factory installed dust collection device.
Duane D.
Great purchase! I would recommend.
Guy P.
Installation was as simple as can be, and it does as well at extracting sawdust as advertised- well worth the money!
Patrick T.
Arrived quickly and was packaged well!
It was easy to install and definitely cuts down on the dust in the air my miter saw creates.
Robert L.
Keeps area much cleaner and was easy to install. Thanks
Kevin S.
So far so good. My dust collection is not quite finished so still getting a little sawdust in the back of the saw. Otherwise, I love the directional flow of the chips while cutting.
