Shawn W.
I combined this part with one of those control boxes from Amazon that turns on the shop vac the same time the saw starts, this combo has truly been geat at reducign sawdust from flying all over my workbench based on where my saw it located.
Stephen B.
80 to 90 % reduction in dust near saw.
Dennis S.
Easy installation, great fix, significant improvement in dust collection
tony h.
Assembly was quite simple following along with the video. As far as collecting dust, I think it does a great job.
Good product.
Wesley G.
This is a game-changer. I used to take my sliding miter saw outside to do any work in order to keep the dust outside and not make a mess of my workspace. With this upgraded dust collection chute, I can now work in my indoor space without having to worry about getting dust everywhere on the floor. I also feel more comfortable not turning off my HVAC system, fearing dust getting pulled into the blower wheel.
Great product, super easy install. I have already recommended it to a number of people. Thanks for making this great product!!
Scott K.
Installed it on me Ridgid saw and it works great...
Steve L.
Using my compound miter saw has always been a messy proposition, and since a lot of my cutting involves exotic species that produce some potentially toxic sawdust, this little baby has been a godsend. It sucks more than Facebook, which is saying a lot. It captures more dust than an 80-year old member of congress. It's a win-win by any measure.
Paul L.
Works great and cuts way down on dust
Paul S.
Wonderful product and even better customer service!
Robert A.
Although I purchased both sizes it did not include an attachment that fit the original Rigid saw dust collection bag. Could you please send me that fitting?
The video for attachment was helpful.
Eugene R.
Easy to install, work’s great
Barney G.
I bought this about 2 weeks ago and installed in under 20 minutes. Hardest thing is figuring out the location of your dust collection vacuum hose(this is not really hard). I had a homemade wood catch basin behind the fence on my miter saw but I could not go 45° to the right and when I did do 45° to the left, it shot dust all over my bench. This does not catch everything, but it is 95% better Then the stock set up My neighbor has a saw just like mine and I sent a picture that day to him and told him he needed this.
mike w.
This was a great product and works very well thank you shop nation
mike
Awesome product Thank you shop nation
Stuart
Dust Collection was great!!
Karl C.
Other than a slight clearance issue (which support provided a solution for), installation was quick and easy - definitely watch the video.
Once installed, it definitely cuts down on the sawdust - night and day difference!
LARRY P.
Bought the one for the 12" Ridged saw and it did fit and work on my 10" Ridgid saw with drilling and tapping 2 of the 4 screws. It also really does capture more sawdust. Glad I purchased.
Grayson P.
Good product. Packaged well. Video instructions were well done. I am having an issue with the saw cutting into the flap even though I followed the instructions well. It works as expected.
Thomas W.
I found the little short hose and the connecting devices (adapters) that came with the package to be ineffective. The hose was too short to get it out of the way of the slide moving back and forth. It would either get hung up while moving the slide one way or get crimped when moving it in the other direction. The little connecting devices would not stay connected. I resurrected a vacuum hose that I bought from Rockler many years ago that fit directly to the dust chute perfectly. It is long enough to accommodate the sliding of the saw in both directions, and I was able to tie it up out of the way so that it would not get hung or crimped. I did that by inserting a wooden dowel into the saw carry handle and taping the hose to it. Works great now, and although I cannot definitively say it captures 90% of the dust, I see very little dust on the floor behind the saw where it used to pile up. So, in summary, once I was able to get it properly connected to my vacuum, it performed admirably. The dust chute does a great job, but the hose adapters and the little hose did not work for me. Otherwise, I am very pleased with its performance.
Item type:
R4222 / Send me both! (Lg + Md)
James G.
Add me to the list of people skeptical of how much difference this could really make, BUT I am now THOROUGHLY IMPRESSED. This thing is AMAZING!
I wondered where my small cutoffs were going- the collection is so good, it picked them up. I know - that may not be desired, but it demonstrates how good it works.
LOVE IT.
Literally the only dust I have is when I forget to turn on my shop vac.
Esteban V.
I am absolutely thrilled with the dust chute I purchased from ShopNation! The product itself is top-notch and has exceeded my expectations in every way.
But what truly sets ShopNation apart is their incredible customer service. I recently had a small issue with the item, and they went above and beyond to resolve it. They promptly sent me a replacement at no cost, demonstrating their commitment to customer satisfaction.
I cannot recommend this product or this company enough. You won’t regret your purchase!
David H.
Great product well made.
Works far better than the stock dust collector.
Peter M.
This new dust collection attachment for my Ridgid miter saw works great! It's a game changer, it leaves a very small amount of dust around the saw and on the floor compared to how it was before. Very pleased.
Michael G.
This was easy to install and definitely makes a difference. The only thing I noticed was that the supplied zip ties were about an inch short for my R4221 setup - not an issue for me because I have plenty of longer zip ties in the shop.
Debra O.
Thanks! My dust collection problem is solved. Thanks again.
Happy to see you have started your shop project, and a Bobcat is the most fun equipment to operate!
Timothy G.
Fast and easy install on my Rigid R4222. Dust collection is so much better with the Shop Nation parts.
John K.
The dust collector works GREAT! Such a simple idea and design you have to wonder why the OEM didn't do this in the first place. Shop Nation was easy to work with and quick to ship. The part I appreciate the most was the step by step video link. The install could not have been more simple.
Thanks Shop Nation, you rock!
Mike S.
My saw is a R4222T looks nothing like the instruction video,
Have not been able to fit it?
Mike N.
Can confirm this works on the 10” saw. Just need to drill a new hole in the hub adapter. The hole toward the back of the saw are too far back. But taped the hub adapter up and drilled a hole a tad smaller than the screw and we are good to go. 1000% better dust collection compared to the stock version.
Mike G.
It fit no problem.
Jarret S.
The install video was great and really easy to follow. Made a few cuts with my shop vac hooked up to it and it reduced the amount of dust dramatically. I would say a 90% reduction. Thank you so much for making this product!
Chris G.
works better than factory and was easy to install
Greg J.
Wow, I was amazed what a difference this made! I had some very fine dust bust anything bigger was completely gone. Very easy install as well. All parts fit well and directions were very easy to follow. I would definitely recommend.
Matt L.
Very easy to install. Hopefully the dust coming from thr front will be reduced.
Robin A.
Works great, easy install. Great service, I ordered incorrect part the first time, easy turn around to get the right one.
Thank you!!!!!
George B.
The product is very well-made. I watched the install video and that made the install very easy. After hooking up my dust collector, I ran the saw for a pretty good-sized project and was very surprised at the amount of dust that was under the saw. SIGNIFICANTLY less than the stock bag. The reason for the 4-star is that the supplied extraction hose is about 2" too short because the Ridgid has a longer slide than the other brands. I emailed the company and they agreed and are working on sourcing a new longer hose. Highly recommend this product.
Jay W.
It works much better then the original one which got broken, and no longer can get the one part, and the saw is only 3 years old.
Brent B.
This attached in minutes and has drastically improved dust collection. Why manufacturers don't just engineer this from the start is baffling.
Brian A.
GREAT company, that is dedicated to customer service. Ordered one for my Delta Cruizer, installed, & got sloppy using it the first time. Had a piece of off fall shoot into the dust port, knocking it off. Contacted Shop Nation about replacement. They sent one out immediately, & the cost was much less than I expected. Will happily buy from again. Oh yeah, the dust chute works much better than the original. Lol. Miter saws or horrible dust creators, but this product tames it very well.
ronald b.
I`ve tried other dust collections helped a little bit but this one sucks the dust fast about 85 to 90%. Very Happy with my purchase.Ron Bastin
sean m.
For what it is it works very well. Its well designed and easy to install. Nothing will ever capture all the dust from a miter saw but this exceeded my expectations.
Tony M.
We didn't totally eliminate the dust, but I didn't expect to. I've been watching Travis's videos on YouTube for a while, and I really enjoy where he makes these adapters for miter saws. I was glad that the ones for the Ridgid R4222 came out. My miter saw station was always covered in dust. I cleaned it up and put the new chute on, and I was amazed that probably 90% of the dust was making it into my shop vac instead of all over the wall and the miter saw station. Thanks Travis for trying to solve our miter saw dust collecting issues!
Andrew M.
Definitely upped the dust collection. Not sure there will ever be a dustless option with a 12” saw but this comes close enough.
Tim L.
Kit for the Ridgid 4222 was easy to install and everything fit perfectly. I’m not a fan of the exhaust side fittings, fit well but have thin walls, wish they were more robust. I had saved a hose from an old house vacuum, which worked out well. Kit is great, but would’ve loved a complete solution from saw exhaust all the way to a 2 1/2” for an easy connection to my small shop vac system.
Paul L.
Installed on my r4221 and it works really good.easy to install way better the the stock dust collector
