Jeremy S.
No more huge pile of sawdust behind my saw anymore! Works amazingly well, thanks!!
Kent S.
Easy install and works great!
Gary E.
Works as described. Couldn’t get to the installation instructions though.
Matthew C.
Great product. Shop is much cleaner now.
Craig S.
Works great on 1” boards, however 4” posts cause the rubber to get eaten a dust goes everywhere .
Alan P.
Unbelievable! Went together so easy. Took all of 10 minutes. Can’t believe how much junk you take off to add one part. Don’t know how you did it, but flawless design and execution.
Thank you for improving my saw and my experience now.
Nate
This thing is incredible. It really cuts down on the saw dust in my shop. Highly recommend.
Scott L.
The dust collection is very much improved. The rubber shoe has a tendency to get caught on the piece being sawed.
Smokey P.
It fits on my machine good. The dust collection port is a small opening at the left side. If the area was sloped toward the opening, it would help. You must have a strong suction to get maybe half the dust. It may be better on a different machine. I have a grisly.
Brian B.
Worth every penny.
Guillermo
It does do a better job than the oem system. Easy to install and looks good.
Chris G.
I have not yet attached this to my Hercules mitre saw, so I can’t really offer an opinion as to its functionality.
The science of it looks to be a vast improvement over the standard dust collection system. That is what drew my attention and ultimately swayed me to purchase. I have high hopes but have not yet deployed it.
Bradley B.
I just started using it, and so far I'm not super impressed with it. There's still a sh!tload of dust coming off the saw... we'll see how it goes in the next few weeks or so. Hopefully I'll like it more, it's too expensive to not!
Frank B M.
This kit is what the manufacturer should have designed to come with my miter saw. I’m so glad I made this purchase. Pretty easy to install. I love that it was 3-D printed specifically for my saw.
Terry H.
I watched the installation video a couple of times then easily made the change. The collection chute appears to be good quality. I have a Rockler Dust Extractor running through a Vevor dust separator. The chute collected an overwhelming amount of the dust generated while cutting a 2x4.
Joe B.
Easy installation, well made, looks great, works great!! So much better than the factory setup! I definitly reccomend this
Bruce B.
Easy install, great quality parts.
Colby B.
Piece of wood broke off I was cutting and demolished the new dust collection system that I mounted on the saw so I ordered another part and will put on and if it breaks again I’m going to put back on my original equipment
GUILLERMO R.
Loved the fit and the easy of installing it. The color scheme was a perfect match. The performance has been on the marginal side to be honest. It is better than the stock dust collection shoot but so far not significantly better. I do not know if it is the result of the large blade or what, but it was not the home run I was hoping for.
Jeff Y.
Works great. I didn’t realize how well it worked until I forgot to turn the shop vac on. Would definitely recommend.
Luke P.
Work’s great, would recommend buying.
Waldon C.
Haven't used it much yet, the dust collection has differently improved with what I have done.
Kathie B.
This makes cleanup very easy and keeps debris contained.
Michael M.
Video of how to install the new dust collector was very well done. Installation was easy. Reduces the amount of sawdust that doesn’t get captured substantially. The sawdust that doesn’t get captured mostly falls near the saw making cleanup easy.
Mark V.
DEFINITELY AN UPGRADE.
David S.
Instructions were clear and it was easy to put together. But… I was really disappointed in what sawdust it did NOT pick up. I don’t think it did much better than the original saw dust collector. The pictures are from cross cutting a 2X6 with just three cuts.
Joseph J.
Re install went well as was expected. Installed today and made several test cuts. It worked better than expected. I would definitely purchase again. looking forward to seeing your next endeavor.
Joseph Jetton
Richard C.
really haven't made but a couple of cut but it seems to work better than the original dust collection that came on the saw
Jim E.
its seems to workwell as long as I am only using it as a chip saw. once I try to cut wood planks in Mita mood with the say blade on the slide it seems to lose its effectiveness. Also the rubber already is ripped with only cutting about 10 boards.
Bill K.
GREAT installation video specific to each model. Reasonable improvement in dust collection. Test cuts with various hose sizes and DC vs Vac showed shop vac and 2.25" hose to be best combination. But not a huge difference. Will continue to experiment. Removal for blade change a turnoff. Would recommend.
Gary S.
Easy to install. Very good video for installation. Preform much better than the stock dust collection port.
Kenneth W.
Very nice product.
William S.
I was a bit skeptical of this 3D printed dust controls add-on but after reading the reviews I thought I’d take a chance. The price was awesome so why not? It arrived quickly and I took it to my shop and, using their video, began the install process. It couldn’t have been easier. Took maybe 10 minutes. It looks like OEM fit. The only minor issue is routing the exhaust hose. I did run it over the motor and zip tied it to the handle.
As far as functionality, here is my unscientific opinion. The stock Hercules dust control unaided is a 1/10 at best. Not only is it bad out of the box but it got worse as you use the saw. Adding my Hercules dust extractor helps and brings it up to a 5-/10. Installing the SN dust control setup with the dust extractor brings it up to an 8/10. Sure, there is some sawdust that gets past the collector but very little. I really do love it. Try it
Bruce
Rubber bottom guard could be slightly longer on the outside ends. (left and right)
Overall, it works 90% better than original equipment.
James G.
Easy Install. Performs as advertised.
Fred W.
I have a 3d filament printer, but buying this saved me a lot of time designing and printing my own. It's well worth the price.
Tybee E.
Very well designed and very well made... The instructions were clear and made installation a breeze... and best of all it picks up the majority of the dust and chips...
Nathan L.
Great product. Fits nice, easy install. Drastically reduced the amount I have to clean up
Robert G.
Surpassed my expectations! Just very minimal dust while cutting, would highly recommend this!
Shipping was fast, and professionally packaged.
James L.
Did not fit my saw. Wrong part not even close.
David B.
Since receiving the product ive cut a few boards. Dust collection is better. Im impressed so far. The shipping is atrocious! it took quite I while to receive. I wish that would get better. The product seems to be plenty sturdy and does what it says it does!
keith k.
Picks up 90% of dust .
Scott D.
The install was easy. The stock dust collation was about 65%. The new dust collation is about 90%. I know it will never be 100%. But you have to go slow to get the best collation. I have great suction on the port so that's not a problem. just go slow and it will do a good job.
landers l.
Fits perfectly on my saw. Huge improvement.
Joseph H.
Great product! Very well thought out and made. The directions are great, even took you to a very helpful video on the assembly. I am very glad I found it and they made one for my model of saw.
Clinton H.
Works fantastic, with with the Hercules dust collector without any adapters. Make a huge difference on clean up, way way better then the factory one. Just watch how your set up the flapper, I missed a screw and the saw blade got it. Thankfully that send 2
Keith M.
Unfortunately I have already broke mine. Totally my fault. I think it will still work but I sure am aggravated over it.
Richard M.
This dust collection is much better than that of the OEM. However, it did not perform as well as I hoped. Although it appears to have cut my dust issues by more than half, I still have a lot of dust. I've seen similar solutions for the Dewalt saw with roughly the same results as I'm seeing for my Herculies. These other solutions increased the size of the rubber dam, which seemed to enhance the dust collection further.
JOHN S.
It works very well, many times better than factory collector.
Rosalind C.
make exhaust hose longer
John C.
Great product- significant improvement over the original dust chute! Ordering one for my son!
Thanks
Brad L.
Works way better then Factory.
Braam J.
Love it. Easy to install, and works great.
Jeffrey H.
Best thing I could've put on my Saw. No more mess
William M.
Quick shipping, easy install
Gerald L.
Right now, my plan is to return it because the screws are not correct to attach the unit to my Hercules saw and the attachments do not work with my flexible hose on my desk collection system
Bobby B.
Reduced the dust on my Herc saw by 90% easily. Super simple install; top notch instruction. Thank you!
Richard T.
it find it as good if not better the any other saw
Michael H.
Does not improve dust collection very much, and has caused problems when using my sacrificial fence. Have taken it off of the saw because it made it feel unsafe.
Joseph B.
This dust collector does not do a good job. It's better than the factory system, but that's not saying much. I got the same results from wrapping a piece of poster board around the outise of the factory dust collector.
DAVID M.
It's actually a fairly easy installation, if you follow the step by step video. It most certainly collects more sawdust that the factory installed system but it isn't a panacea for dust collection. I'm not aware of any system that is, short of installing a shroud around your miter saw. I haven't done a trimming out project since installing it but I am impressed by the amount of sawdust collected in my test cuts and the few off cuts that I have made.
Tom B.
Works well catches most of the dust, easy install.
happy with the purchase
Marcus J.
Love it. Sucks a lot of dust however I sometimes use a zero clearance fence and when doing so it tore the rubber boot
kevin f.
Shipping was fast and directions to install were easy to follow.
Howard R.
Parts went together very well, very easy to assemble. Have used it a couple of times and it seems to work very well. My only concern is the length (top to bottom) of the rubber piece that helps capture the sawdust. I think it would miss less if longer.
Gabriel S.
Works as advertised
Dr. Randall A.
Excellent Installation video.
Take the time to watch, rewind, watch, follow step by step and sooner than you stress it’s ready to reduce, not replace, broom time!
Joseph .
I installed the dust collector on my new Hercules miter saw this afternoon and so far, I am terribly disappointed. I didn't have any less dust than I did when I attached a semicircle piece of poster board to the OEM dust collector. This was not worth the money.
Emily D.
Vast improvement over the stock collector, great instruction video went together easy!
Howard
I've attached it and have used it a couple of times. I'm pretty happy with it. I want to use it a couple of more times. The only thing I've noticed so far is that it seems if the rubber pad was slightly wider it would catch the sawdust a little more.
James P.
Absolutely love the upgrade. I purchased the dust collection system upgrade before I bought the saw, then when Harbor Freight ran the huge 30% Off all Hercules corded power tools sale earlier this year I purchased the saw for $249. I had been waiting for the stand to go on sale, and last week I was finally able to pick it up for $89, so today I did the the set up of the whole miter saw system and installed the dust collection prior to making my first cut; I absolutely love the whole setup!
Joseph
Great company. Product is as stated and fits perfectly.
Robert W.
Worked as advertised. Install instructions were great.
Best customer service I have received online to date.
Would buy again.
Joe O.
Easy to install, fits perfectly. Huge difference in the amount of saw dust etc around my saw. Picks up I’d say close to 75%. You need a dust collector obviously.
Matthew A.
Everything has been thought of - the extra screw and rubber shield, the post card with the qr code link to the installation video, advice on what not to do (over tightening) and the follow up emails. All very seemless and professional.
BRYAN M.
Haven’t install yet but quality looks great!!
Larry P.
Fits perfectly and very well made. So much better then before. No dust!
John G.
Very simple installation that took just a few minutes. First board cut I saw an immediate improvement. No more sawdust blowing ot the back and all over my workbench.
RAFAIL M.
Better than factory original
Jordan B.
Worked like a charm! I’d say a solid 95% of the man glitter gets sucked away instead of covering my bench top,
David V.
Super easy to install, and works great!
Daniel T.
Easy to install. Picks up 95% of dust. Flex hose could be longer to help clear motor housing.
Jim A.
Assembly instructions were easy to follow
Installation went smoothly and all parts fit well
With
Thomas K.
great tolerances. Nicely designed. Fits well, works great!
TRAVIS K.
Easy install and works great thank you!
Michael D.
Finally had a chance to install the dust chute on my Herculee 12 inch sliding compound miter saw. It took only half an hour and it works great collecting almost all of the sawdust. One of the best add-on investments improving a tools performance that I have made. Thanks for this improvement to my workshop.
Jeff S.
Easy to install and directions were great. Connected to my dust collector and can definitely see a difference. Thanks!!
Bruce C.
It fits, it works and the installation video was an excellent aid.
Joseph B.
Generally really like it! Its nice to not have my miter saw blasting my garage with dust :P As an engineer I would make one slight change to how the hose adapter locks in. I would make the notch and bump a bit more prominent. The flex of the filament makes it a bit too loose. Overall very good!
Antonio
It is great! It does not collect 100% of the dust, but I wasn't expecting it to. Came with a QR code to help with installation, and that made it intall easily.
BOB W.
Awesome product, easy to follow instructions! It's a true game changer!!!
JEFFREY P.
Fits well, easy to install. Does a much better job collecting dust than the factory original.
Jerry D.
Everything went together fairly easy. I'm very happy with the dust reduction. I am also impressed in the speed with which your customer service answered my questions.
Calvin S.
Was simple to install but had to rig a little to connect it to my shop-vac. Takes care of about 85% of the debris, so a way big improvement as I used to cover the wall of my garage .
